rotor vs. piston

Does anyone know where I can find OEM type clips that hold on the door panels?

rxtory

my best guess that some one here says victoria british so try them

rotor vs. piston

ya, I've looked though. No dice, or I just over looked them?

fcdrifter13

Just about any place that supplies body repair supplies have them, if not go to a body shop and ask them they can either order them or point you to were to ge them. NAPA has a large selection of interior clips. If you dont see it on the shelf ask for there catalog.

Hope this helps.

Alex Saunders

rotor vs. piston

NAPA, I'll have to make a trip tomorrow after work. Thanks!!

fcdrifter13

Yeah just look buy the body repair stuff they should be around there. I know that some of the clips in older cars arnt made anymore and you may have to go and deal with your local mazda dealer to get ahold of them.

Alex Saunders

t_g_farrell

iTrader: (1)

Just go to pepboyz, autozone, advanced auto, any of those places and look for the red help parts. There will be some that will work, if not try a different store. I used some of the help clips for my own interior stuff to get it stuck back on correctly, didn't cost more than a couple of bucks and I have leftovers to boot. Good luck.

rotor vs. piston

do you have the part number on the box?

kgray

psh.. Advanced Auto didnt have any that worked for me.

t_g_farrell

iTrader: (1)

I'll check when I get home tonite. I had the box lying around, just saw it yesterday. It was a Help! part in a red blister package.

7aull

iTrader: (2)

Get the Sunbeam tiger or MGB cataologue from Vic Brit. They have the same clip. You try Mazda?
The real challenge is getting the rubber "nipple" that fits in the panel hole, that the clip in turn fits into. These are usually shot on the original panel. Again the Tiger cat. from Vic Brit features a NYLON "nipple" (my term) that is MUCh more durable - and looks like it would fit.
Stu Aull
80GS
Alaska