so my clutch is making wierd noises
#1
Senior Member
Thread Starter
Join Date: May 2006
Location: racine wisconsin
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
so my clutch is making wierd noises
so i put a clutch in my car last week and been driving if for a while and today we decided to seafoam it so were goinig along and went to shift to 3rd and it wouldent go in .....so it went into 4th them we slowed down and got it into 3rd and then we have to stop for a stop sign...so we go to take off again and when releasing the clutch it made kinda a scraping/grinding noise pretty bad but still grabbed and took off fine so we eased it home in 2nd, could my PP have warped or something from not breaking it in enough? any one have an idea?
#2
Lives on the Forum
iTrader: (13)
Originally Posted by 83rx7boy92
so i put a clutch in my car last week and been driving if for a while and today we decided to seafoam it so were goinig along and went to shift to 3rd and it wouldent go in .....so it went into 4th them we slowed down and got it into 3rd and then we have to stop for a stop sign...so we go to take off again and when releasing the clutch it made kinda a scraping/grinding noise pretty bad but still grabbed and took off fine so we eased it home in 2nd, could my PP have warped or something from not breaking it in enough? any one have an idea?
I sure hope when you refer to the seafoam that it was put in the engine?
As far as your grinding noise, when it grinds and won't go into a particular gear and you depressed the clutch long enough without "Speed shifting". Then I would deduct that 3rd gear synchro is going out. But then you state that you stopped, then went to accelerate and thats when you heard a strange noise.
Did the noise increase as vehicle speed increased or was it just on take off, then went away?
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
stickmantijuana
20B Forum
7
08-30-15 12:08 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM