Short shifter kits for FB?
#2
http://www.mazdatrix.com/g4.htm
there is also other places. and i think someone on the forum here makes 'em. im sure youll hear.
there is also other places. and i think someone on the forum here makes 'em. im sure youll hear.
#4
are these not short throw????
Originally Posted by MazdaTrix
The shorter throw of these Short Throw Shifters is accompolished by changing the pivot point of the lever. The distance the **** travels when shifting is shortened to 3 1/2" from the original 6".
#5
Still Dreams of 3rd Gen
iTrader: (6)
Join Date: Sep 2003
Location: Owensboro, Ky
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
30 minutes to go: http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT
200 is too much, these work great unless you want the stock look, gregs, fbII, and( 83gsl....?) all have them and love em.
200 is too much, these work great unless you want the stock look, gregs, fbII, and( 83gsl....?) all have them and love em.
Last edited by jorx81@aol.com; 08-20-04 at 07:35 PM.
#6
Bimmer *****
Originally Posted by jorx81@aol.com
30 minutes to go: http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT
200 is too much, these work great unless you want the stock look, gregs, fbII, and( 83gsl....?) all have them and love em.
200 is too much, these work great unless you want the stock look, gregs, fbII, and( 83gsl....?) all have them and love em.
#7
Still Dreams of 3rd Gen
iTrader: (6)
Join Date: Sep 2003
Location: Owensboro, Ky
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the 7th grade education. It does make it slightly harder to shift but they have a really great feel, stock shifters are too long. It's the most bang for your buck.
$30 plus a core and free shipping to anyone on the forum. Ask my references above!
$30 plus a core and free shipping to anyone on the forum. Ask my references above!
Trending Topics
#8
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
i am chiming in right now. i have a short stance shifter from jorx81.... it kicks some serious ***. i have had people sit in my car and just get a feel of it and like it better than their 150 - 200 dollar "REAL" short throw shifter. his makes it really tight. i dont think it's harder to shift actually, only reverse. in fact, my slamming it in to third as fast as possible is a breeze now. especially compared to stock. for 30 friggin dollars, you really can not beat it.
-zac
-zac
#9
FB+FC=F-ME
If making a short THROW shifter was as easy as making the stick shorter,they wouldnt cost 200 bucks.They're 200 bucks because its an engineered part.Albiet,not a wildly difficult part to engineer,all you need is a lathe and a measuring tape,but it isnt just a used Mazda part thats been cut and rethreaded.
I tried the short shifter when I was broke,it cant compare with a proper short throw unit.My opinion..........
I tried the short shifter when I was broke,it cant compare with a proper short throw unit.My opinion..........
#10
Bimmer *****
Originally Posted by steve84GS TII
If making a short THROW shifter was as easy as making the stick shorter,they wouldnt cost 200 bucks.They're 200 bucks because its an engineered part.Albiet,not a wildly difficult part to engineer,all you need is a lathe and a measuring tape,but it isnt just a used Mazda part thats been cut and rethreaded.
I tried the short shifter when I was broke,it cant compare with a proper short throw unit.My opinion..........
I tried the short shifter when I was broke,it cant compare with a proper short throw unit.My opinion..........
#11
Ryan
#13
FB+FC=F-ME
"think if you combine the 2 u'd be better off... a short throw shifter and a shortened shifter"
The only problem there would be increased effort.With the longer portion below the pivot point on the short THROW shifter,you lose some leverage advantage up top,even though the upper stick is stock height.This is because of the fulcrum point has effectively been raised.Combine that with an even shorter upper lever after you cut the stick down,(which means even less leverage advantage)and youll probably end up with tennis elbow after a years worth of shifting.Anyone wanna cut down a $200 short throw shifter to see?
.02 more cents, and I raise you a nickel,heh,heh.
The only problem there would be increased effort.With the longer portion below the pivot point on the short THROW shifter,you lose some leverage advantage up top,even though the upper stick is stock height.This is because of the fulcrum point has effectively been raised.Combine that with an even shorter upper lever after you cut the stick down,(which means even less leverage advantage)and youll probably end up with tennis elbow after a years worth of shifting.Anyone wanna cut down a $200 short throw shifter to see?
.02 more cents, and I raise you a nickel,heh,heh.
Last edited by steve84GS TII; 08-21-04 at 12:42 AM.
#15
Bimmer *****
i've decided since i have an extra FB/S4 FC shifter laying around, tomorrow i'm going to start brainstorming on it and test making my own short throw shifter... and after i test the short throw part, i'll shorten it as well
#16
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by steve84GS TII
"think if you combine the 2 u'd be better off... a short throw shifter and a shortened shifter"
The only problem there would be increased effort.With the longer portion below the pivot point on the short THROW shifter,you lose some leverage advantage up top,even though the upper stick is stock height.This is because of the fulcrum point has effectively been raised.Combine that with an even shorter upper lever after you cut the stick down,(which means even less leverage advantage)and youll probably end up with tennis elbow after a years worth of shifting.Anyone wanna cut down a $200 short throw shifter to see?
.02 more cents, and I raise you a nickel,heh,heh.
The only problem there would be increased effort.With the longer portion below the pivot point on the short THROW shifter,you lose some leverage advantage up top,even though the upper stick is stock height.This is because of the fulcrum point has effectively been raised.Combine that with an even shorter upper lever after you cut the stick down,(which means even less leverage advantage)and youll probably end up with tennis elbow after a years worth of shifting.Anyone wanna cut down a $200 short throw shifter to see?
.02 more cents, and I raise you a nickel,heh,heh.
dude, we know the difference. 30 bucks for a tighter smoother shift now... 200 bucks for a shorter shift when im not poor. how many other people are gonna try and give lessons?
#17
Banned. I got OWNED!!!
Join Date: Nov 2002
Location: KING COUNTY, WA
Posts: 4,980
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FB II
i am chiming in right now. i have a short stance shifter from jorx81.... it kicks some serious ***. i have had people sit in my car and just get a feel of it and like it better than their 150 - 200 dollar "REAL" short throw shifter. his makes it really tight. i dont think it's harder to shift actually, only reverse. in fact, my slamming it in to third as fast as possible is a breeze now. especially compared to stock. for 30 friggin dollars, you really can not beat it.
-zac
-zac
i love it over the stock shifter, however geoffs mazdatrix short throw shifter is way better
#21
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by steve84GS TII
If you already understand,then dont read it.
If you dont understand,maybe you just learned something....isnt that why were all here?
If you dont understand,maybe you just learned something....isnt that why were all here?