She lives (Videos)
#1
Wankel Me This!!
Thread Starter
She lives (Videos)
well here is a video of my RX7 Running. i think i need a new fuel pump or my fuel filter.
part one
http://ca.youtube.com/watch?v=cl4UxWVXRo8
part two (looking over the motor to show how we get it running)
http://ca.youtube.com/watch?v=cZmQFVxD_io
PS: there was alot of smoke
hope you like the video
part one
http://ca.youtube.com/watch?v=cl4UxWVXRo8
part two (looking over the motor to show how we get it running)
http://ca.youtube.com/watch?v=cZmQFVxD_io
PS: there was alot of smoke
hope you like the video
#5
Wankel Me This!!
Thread Starter
i know here are better links
part 1
http://media.putfile.com/rx7-12A-start-up
part 2
http://media.putfile.com/RX7-12-start-up-part-2
part 1
http://media.putfile.com/rx7-12A-start-up
part 2
http://media.putfile.com/RX7-12-start-up-part-2
Trending Topics
#8
Wankel Me This!!
Thread Starter
#11
Wankel Me This!!
Thread Starter
no i will put a hand pump in the car so i can pump in from inside.
we dont know the reason why gas is not pumping it mite be the fuel filter or the fuel pump
#12
Water Boy
Join Date: Aug 2007
Location: MontCo, MD (Speed Cameras FTL)
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Check the filter if you haven't already. $5 part and in a car that's 24 years old, lots of stuff has gone through the line, pretty easy to gunk that up.
#16
Wankel Me This!!
Thread Starter
#20
Wankel Me This!!
Thread Starter
#21
Smoke moar
If one rotor isn't running it'll still turn silly :P
I'll agree with Hyper4mance2k it doesn't sound right, I know squirting gas into the carb isnt the best but that'd a valid method it'll suck the gas into both rotors enough to burn, yet it doesn't sound like my friends 12a that I worked on at all.
#22
Wankel Me This!!
Thread Starter
1 rotor
If one rotor isn't running it'll still turn silly :P
I'll agree with Hyper4mance2k it doesn't sound right, I know squirting gas into the carb isnt the best but that'd a valid method it'll suck the gas into both rotors enough to burn, yet it doesn't sound like my friends 12a that I worked on at all.
If one rotor isn't running it'll still turn silly :P
I'll agree with Hyper4mance2k it doesn't sound right, I know squirting gas into the carb isnt the best but that'd a valid method it'll suck the gas into both rotors enough to burn, yet it doesn't sound like my friends 12a that I worked on at all.