SA front end rebuild kits?
#1
SA front end rebuild kits?
i always see the bushing kits, but never anything else. does anyone offer a complete kit or should i just go to any local parts store and get everything individually there? any particular brands to look for or avoid?
#3
i'm assuming everything since i have no history on the car as far as mileage or repairs go and it was in no condition to drive. its been sitting for 10 years and all the rubber parts are cracked and i have the engine out so i figured i'd just replace it all and be done with it. its an almost completely rust free/dent free body, but everything else needs some tlc.
#4
#5
If the front end has never been touched, then I'd start with FB strut housings, struts, springs, idler arm, tierods, ball joints, check the wheel bearings, replace the bushings, then move to the rear for shocks, springs and bushings.
Don't forget the brakes while you're at it.
Don't forget the brakes while you're at it.
Thread
Thread Starter
Forum
Replies
Last Post
JIMMY54
1st Generation Specific (1979-1985)
2
08-12-15 05:40 PM