jeezy25

im going to drive this f-ing car off a bridge. i wnet to get tires today and while my car was on the lift i saw it. RUST to fill you guys in this is my 2nd body in about a year. the first one i still have but its not in use due to the missing upper control arm mounts. they rusted away and someone repaired it w/o making a new mount. i got a whole new car from the scrapyard with a bad motor...swapped over everything to make it an SEand now this. i have the dreaed bin rust and its taking my drivers side control arm mount with it. even where there is no rust the metal is tearing. how can i fix this. if i cant fix it ill prolly just sell the car and be done with rotarys for good

Kerebrus

iTrader: (30)

i've felt this way too many times, if you have a genuine passion for rx7's let alone rotary's you can never let go

trochoid

iTrader: (6)

Get it back on the lift or jackstands, pull the bins and post pics, we can guide you through the repair. You will need access to a grinder, cutoff tool/sawzall/torch and a wirefeed welder.