ROTARYSHACK TII 1st gen Resurrection
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: ucla
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
ROTARYSHACK TII 1st gen Resurrection
Here are some pics of my 85 Gsl. I'd like to thanks Rob and his buddies from RotaryShack for their amazing work and generosity. And to think, It only took 2 weeks this time around. Also, let me know what you guys think about the wheels.
Cheers!
Cheers!
Trending Topics
#8
Originally Posted by 1sick7
Here are some pics of my 85 Gsl. I'd like to thanks Rob and his buddies from RotaryShack for their amazing work and generosity. And to think, It only took 2 weeks this time around. Also, let me know what you guys think about the wheels.
Cheers!
Cheers!
Here's the only pics I have of my car
The paint on it is horrible but original no accidents.
BTW, do you have a better shot of the wheels, I can't tell what the center section looks like. They look great with the polished lip though.
John
#10
Originally Posted by Hyper4mance2k
both those cars have fu(king awesome rims. I really like the bottom ones. Damn Gsl-SE you guys get rims >
They came with the car. I was told they are Watanabes. They are 14x7 with 195/60/14.
#14
Originally Posted by MarkPerez
wheres the turbo ??? and you might want to turn your battery around, the hood hinge is very,very close when the hood is closed. fyi
#16
Banned. I got OWNED!!!
Originally Posted by XLR8
No intercooler....Blow-off valve..... KEY elements of longevity that wouldn't cost too much to throw in there....
Overall very nice..
Overall very nice..
as far as no intercooler or bov goes, there at least 50 of these setups locally that dont have these key elements as you call them....(my white car being one of them)well i do contest your statement!!! some of these cars have been running years with almost no problems , other than excessive fuel consumption and an occasional speeding ticket!!!
remember!!!!most people are on a budget.....where you spend your hard earned $$$ is my main concern when building a turbo rotary on a budget......
i didnt say adding an intercooler wouldnt help(brcause they help the h/p gain alot) im saying its not a must when building a turbo car!
#18
Senior Member
Join Date: Feb 2004
Location: East Tenn (Tri-Cities Area)
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
You're kidding. I thought the intercooler was like as necessary as a radiator for a N/A engine. So what do you do different if you're not running an intercooler? I.E. special ventilation, not drive as hard, less boost, etc.
Man, that totally sparks my interest now...
Man, that totally sparks my interest now...
#20
Rotary Enthusiast
Join Date: Mar 2003
Location: LOS ANGELES
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1stgen_tn
You're kidding. I thought the intercooler was like as necessary as a radiator for a N/A engine. So what do you do different if you're not running an intercooler? I.E. special ventilation, not drive as hard, less boost, etc.
Man, that totally sparks my interest now...
Man, that totally sparks my interest now...
#22
I can has a Hemi? Yes...
iTrader: (2)
Originally Posted by FB II
usually you won't run as much boost. throttle response without an intercooler is the win! haha
You can Race your Turbo 1st Gen, with No Intercooler,
against a similar prepared Turbo 1st Gen, with an Intercooler.
You can both punch it from a 2nd gear roll,
The Non-intercooled Turbo 1st Gen will move forward with the faster response, and less lag, pulling 5 whole inches on the other Turbo FB.
And then .245 seconds later...
The Turbo intercooled 1st Gen running more boost, with more power,
will blow by you like you're standing still.
Spoken from Experience...
I put a beating on a couple of Turbo FB's around here recently.
#24
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
or just do what i did and mount the intercooler close so there's as little bit of piping as possible, but still where it can get plenty of air
#25
Got Boost?
The volume of air in the intercooler is the main contributor to the loss in throttle response. For low boost or high octane fuels, intercooling isn't a must, but hp will suffer a bit. Good intercooling is important if you are trying to maximize power at a given boost level, as well as allowing more boost without fear of detonation.