Rotary Replacement
#1
Newbie
Thread Starter
Join Date: Jun 2007
Location: Canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rotary Replacement
Hi, i'm looking in to buying an '85 1.1L 12A RX-7 as my first car and I would like to know what i'm getting in to. What parts are most likely to wear out and what likely needs to be rebuilt in comparison with a regular engine with piston/rings/cylinders?
Stephen
Stephen
#2
Rebuild kits run around 1k$. With a rotart, if something in the engine wears out it is rebuild time, be it a coolant seal, drinking more oil than needed, or even bad apex. These cars are a blast to have, but you are guaranteed to work on them as much as an 80's jag.
#3
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (4)
Join Date: Jun 2005
Location: Perth, Western Australia
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Also you MUST do regular preventative maintenance like change the oil regularly!!!
Also ALWAYS ensure the engine is up to operating tempreture BEFORE you drive it hard!!!
Way too many rotaries have died over the years from these two simple mistakes.
Cam...
Also ALWAYS ensure the engine is up to operating tempreture BEFORE you drive it hard!!!
Way too many rotaries have died over the years from these two simple mistakes.
Cam...
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM