RENESIS in my GSL-SE
#26
<l><l>
Join Date: Feb 2002
Location: houston (katy), tx
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by LongDuck
You, or your chosen speed shop, is going to have a heck of a time trying to get the electrical systems up and running as they are on the RX8. Primarily the use of a 'fly-by-wire' throttle body control which uses an electrical solenoid to operate the throttle body, not to mention the requirements for a closed-loop fuel injection system that has dead shunts to each injector and also requires a variable rate (ECU controlled) fuel pump to provide proper pressure as the engine RPM changes.
There sounds to be an extensive amount of 'cannibalizing' an RX8 to get these parts unless you have an electrical engineer on staff who can tackle these issues.
With the emissions systems involved to get the RX8 to where it is, I would also think that you're going to have a hard time getting all the required systems to fit in the FB engine bay - definitely some custom fabrication and cutting will be required.
Overall, an excellent project that should yield some fantastic performance results. Good luck with it,
You, or your chosen speed shop, is going to have a heck of a time trying to get the electrical systems up and running as they are on the RX8. Primarily the use of a 'fly-by-wire' throttle body control which uses an electrical solenoid to operate the throttle body, not to mention the requirements for a closed-loop fuel injection system that has dead shunts to each injector and also requires a variable rate (ECU controlled) fuel pump to provide proper pressure as the engine RPM changes.
There sounds to be an extensive amount of 'cannibalizing' an RX8 to get these parts unless you have an electrical engineer on staff who can tackle these issues.
With the emissions systems involved to get the RX8 to where it is, I would also think that you're going to have a hard time getting all the required systems to fit in the FB engine bay - definitely some custom fabrication and cutting will be required.
Overall, an excellent project that should yield some fantastic performance results. Good luck with it,
Good luck and keep us posted
<l><l>
#27
Full Member
Thread Starter
Join Date: Aug 2003
Location: Houston
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by LongDuck
You, or your chosen speed shop, is going to have a heck of a time trying to get the electrical systems up and running as they are on the RX8. Primarily the use of a 'fly-by-wire' throttle body control which uses an electrical solenoid to operate the throttle body, not to mention the requirements for a closed-loop fuel injection system that has dead shunts to each injector and also requires a variable rate (ECU controlled) fuel pump to provide proper pressure as the engine RPM changes.
There sounds to be an extensive amount of 'cannibalizing' an RX8 to get these parts unless you have an electrical engineer on staff who can tackle these issues.
With the emissions systems involved to get the RX8 to where it is, I would also think that you're going to have a hard time getting all the required systems to fit in the FB engine bay - definitely some custom fabrication and cutting will be required.
Overall, an excellent project that should yield some fantastic performance results. Good luck with it,
You, or your chosen speed shop, is going to have a heck of a time trying to get the electrical systems up and running as they are on the RX8. Primarily the use of a 'fly-by-wire' throttle body control which uses an electrical solenoid to operate the throttle body, not to mention the requirements for a closed-loop fuel injection system that has dead shunts to each injector and also requires a variable rate (ECU controlled) fuel pump to provide proper pressure as the engine RPM changes.
There sounds to be an extensive amount of 'cannibalizing' an RX8 to get these parts unless you have an electrical engineer on staff who can tackle these issues.
With the emissions systems involved to get the RX8 to where it is, I would also think that you're going to have a hard time getting all the required systems to fit in the FB engine bay - definitely some custom fabrication and cutting will be required.
Overall, an excellent project that should yield some fantastic performance results. Good luck with it,
As far as the mechanical - I REALLY have that covered. Between my shop and Valkerie (next door to me). My company has an in house CNC machine shop. Handy for this project for sure. I intend to use the stock mount points and fabricate brackets out of 304 SS.
I will cut large portions of non-structural chassis out and replace with light gauge aluminum sheets or fiberglass. I want this car to be LIGHT LIGHT LIGHT. The roll cage should provide enough structure to remove LOTS of sheet metal.
The budget is $25k+. There are three paid professionals and myself working on it. I am having wrist surgury on 01/14, so I will be physically useless for most of the project. I will guide the guys (Porche builders) on the rotary specific stuff and they will guide me on chassis issues.
I will take a short series of pics when I deliver the car to Valkerie. For reference I will include some RENESIS pics.
I expect it will be fast AND look good.
#28
Full Member
Thread Starter
Join Date: Aug 2003
Location: Houston
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
i was thinking along the same lines, but i think fitting it wont be that bad compared to fitting a fd 13b, do u plan to port it also? im sure u could get a streetport to pass the sniffer.
As it stands - getting 280+ hp will not be difficult. I am hoping for well under 2200lbs (800lbs lighter than the RX-8).
I could only hope for a mention in SCC.
#30
<l><l>
Join Date: Feb 2002
Location: houston (katy), tx
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
sweet, what side ya on? u gotta come tell us at the houston club meets
<l><l>
edit: oh and btw, do u still have the -se fuel pump perchance? i need it for my project as well lol
<l><l>
edit: oh and btw, do u still have the -se fuel pump perchance? i need it for my project as well lol
Last edited by snake eyes<l><l>; 01-11-04 at 01:08 AM.
#32
I can has a Hemi? Yes...
iTrader: (2)
1st RX-8, way to make an entrance to the Forum! I agree with Longduck all the way. Although you guys seem very knowledgeable, please remember that the RX-8 engine is a very new and complicated machine to run.
Are you sure you wouldn't rather just go with a Turbo system like AJC13B's old car?
Are you sure you wouldn't rather just go with a Turbo system like AJC13B's old car?
#33
Just throwing this out, but if I remember correctly the tranny in the RX-8 is the same as in the miata. This should not pose a problem if you need to save a little money for tranny.
I see $$$ being the only problem in making this work. The motor is great, the tranny is great. the car already handles well. All you've got to do is peice it together. Good luck.
I see $$$ being the only problem in making this work. The motor is great, the tranny is great. the car already handles well. All you've got to do is peice it together. Good luck.
#34
My wife bought me 2 RX-7s
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes
on
2 Posts
1stRX8, if you are really serious about suspension for your car, don't go to Ground Control. Instead look up Jim Susko at G-Force Engineering. He comes VERY highly recommended by the serious racers on the board and he's a really nice guy to boot.
I would also suggest that you swap out transmissions for the TII 5-speed, leaving the SE tranny in could be asking for trouble.
I would also suggest that you swap out transmissions for the TII 5-speed, leaving the SE tranny in could be asking for trouble.
#35
Full Member
Thread Starter
Join Date: Aug 2003
Location: Houston
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure you wouldn't rather just go with a Turbo system like AJC13B's old car?
1stRX8, if you are really serious about suspension for your car, don't go to Ground Control. Instead look up Jim Susko at G-Force Engineering. He comes VERY highly recommended by the serious racers on the board and he's a really nice guy to boot.
I would also suggest that you swap out transmissions for the TII 5-speed, leaving the SE tranny in could be asking for trouble.
Although you guys seem very knowledgeable, please remember that the RX-8 engine is a very new and complicated machine to run.
It's nice to see interest in this project with a car that just turned 20!
Last edited by 1stRX8; 01-11-04 at 10:12 AM.
#36
My wife bought me 2 RX-7s
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes
on
2 Posts
Copy that. Can he make a STREET car? It is not really a race car, so the suspension can only go so far.
#38
I woulden't worry about the -se trans, it should do the job. You say you aren't going to drag race it and the renesis doesn't make a lot of torque. Torque and shock is the killer for transmissions, not hp.
Cool project, can't wait for the pic's
Cool project, can't wait for the pic's
#39
standard combustion
Join Date: Dec 2001
Location: Twin Cities Minnesota
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
I haven't actually broke my 12a tranny yet with the s4 turbo and 8psi on the 12a streetport, so I bet a "Renesis" should handle it with its low non-turbo torque.
I think it has more to do with tires and traction. If it hooked up when it should and stay hooked up, I know tranny and rearend components would fail more quickly. Only thing I've broke was the front main bearing on the tranny, and its cheaper to get another used tranny then buy the $100+ bearing for it!
I think it will be hard to find a bad 13b RX-8 engine(I hate calling it "renesis") because the N/a engines from the S4 and S5's were pretty damn reliable, so that means these new '04 rotaries should be even more durable for long life, and good in a FB. And better yet, they can take 9000rpm!! So the performance numbers for a RX-8: 5.9 0-60, and a 14.5-1/4mile, should be a bit better with the FB's lighter weight.
I think it has more to do with tires and traction. If it hooked up when it should and stay hooked up, I know tranny and rearend components would fail more quickly. Only thing I've broke was the front main bearing on the tranny, and its cheaper to get another used tranny then buy the $100+ bearing for it!
I think it will be hard to find a bad 13b RX-8 engine(I hate calling it "renesis") because the N/a engines from the S4 and S5's were pretty damn reliable, so that means these new '04 rotaries should be even more durable for long life, and good in a FB. And better yet, they can take 9000rpm!! So the performance numbers for a RX-8: 5.9 0-60, and a 14.5-1/4mile, should be a bit better with the FB's lighter weight.
#40
Full Member
Join Date: Oct 2001
Location: The South Bay and North OC
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Please post a good write up. I'm planning on doing the same swap for my 85 SE. Just not as radical as you are. I'm gonna keep it streetable w/ some track/autox use. I'm sure others would like specs on the engine bracket, etc. Good Luck w/ your project! That thing is gonna FLY!
#41
FD > FB > FC
Good luck man. I deal with the renesis day in and day out. I got a couple quick questions for ya, dont know if you've considered the answer.
Are you planning to use the stock ECU, or mabey a haltech instead? The good news about the stock ECU is it mounts in the engine bay, so you dont have to deal with wiring it into the passenger kick pannel.
The renesis features a returnless fuel system. Are you going to keep it this way, or convert it to a return style so you have better controol over the fuel system?
The renesis throttle body is a fly by wire unit, how do you plan to tackle this? Paul Yaw converted it to a traditonal cable style one.
How do you plan on mounting it? I'm not totally sure, but I dont think our front covers bolt onto the renesis. I believe it has an extra bolt much like the 13B-REW.
What about the oil pan? Even if our front covers worked on the motor, the rx8 oil pan wouldnt work in conjunction with it. Its a VERY shallow oil pan.
The starter on the RX8 is on the engine side, rather than on the tranny like the RX7. What do you plan to do about it?
The renesis sits VERY low in the rx8 engine bay. So low that its easier to change the spark plugs with it up in the air. As a result the intake looks pretty damn tall. I'm not sure it would fit in our engine bay and still clear the steering rack.
These to me seem to be the main hurdles with putting a renesis in a first gen. Again GOOD LUCK man.
Are you planning to use the stock ECU, or mabey a haltech instead? The good news about the stock ECU is it mounts in the engine bay, so you dont have to deal with wiring it into the passenger kick pannel.
The renesis features a returnless fuel system. Are you going to keep it this way, or convert it to a return style so you have better controol over the fuel system?
The renesis throttle body is a fly by wire unit, how do you plan to tackle this? Paul Yaw converted it to a traditonal cable style one.
How do you plan on mounting it? I'm not totally sure, but I dont think our front covers bolt onto the renesis. I believe it has an extra bolt much like the 13B-REW.
What about the oil pan? Even if our front covers worked on the motor, the rx8 oil pan wouldnt work in conjunction with it. Its a VERY shallow oil pan.
The starter on the RX8 is on the engine side, rather than on the tranny like the RX7. What do you plan to do about it?
The renesis sits VERY low in the rx8 engine bay. So low that its easier to change the spark plugs with it up in the air. As a result the intake looks pretty damn tall. I'm not sure it would fit in our engine bay and still clear the steering rack.
These to me seem to be the main hurdles with putting a renesis in a first gen. Again GOOD LUCK man.
#42
I too have wanted to do this since I read about the Renises back in 98 from Sport Compact car. Still have my car! =D So I'll be doing that too! But I awaite your report, good luck to ya man.
#43
Full Member
Thread Starter
Join Date: Aug 2003
Location: Houston
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Very good questions....
Stock ECU, primarily for emissions and ease of initial install. In the UNLIKELY case that I feel the swap itself was easy, I may tackle a Haltech. The stock ECU with a simple piggyback is quite nice.
Most likely a typical return system.
I expect to use the "wire" system via the RX-8 pedal assy. I will put some effort into it. If it feels impossible, I will fab a cable system of some sort.
I plan to use the stock engine points and modify the 7 to accept it. That probably means rebuilding the cross bar that the motor a A-arms attach to. It will be many hours of intricate fabrication for that to happen. While doing so, I may try to incorporate the electric assist from the 8 because my left hand is handicap. Time is on my side.
This is OK. I will mount the engine as low as possible since I am building the cross brace / motor mounts from scratch anyway.
I hope i am lucky! I can't see it well enough to have an intelligent plan. I was thinking a BIG hammer and some silver duct tape should be OK.
See above. I am fabbing [or having fabbed] a fiber glass hood. I may need to bubble it a bit for fitment. I am reasonably confident that I will be able to mount it low enough to avoid that.
Target is more than 800lbs lighter than the 8. I will try the math to estimate acceleration. High 4's 0-60?? Probably better - A stock FD - 255hp/2850lbs 0-60 in 5.0. This car est.2200lbs/280+hp. Ohhhhhh Yeah!
GREAT comments and suggestions. Thank you. The web site is registered for the project. It will be ready in a few days.
http://www.1bad7.com
Pics on Tuesday 01/13
Are you planning to use the stock ECU, or mabey a haltech instead? The good news about the stock ECU is it mounts in the engine bay, so you dont have to deal with wiring it into the passenger kick pannel.
The renesis features a returnless fuel system. Are you going to keep it this way, or convert it to a return style so you have better controol over the fuel system?
The renesis throttle body is a fly by wire unit, how do you plan to tackle this? Paul Yaw converted it to a traditonal cable style one.
How do you plan on mounting it? I'm not totally sure, but I dont think our front covers bolt onto the renesis. I believe it has an extra bolt much like the 13B-REW.
What about the oil pan? Even if our front covers worked on the motor, the rx8 oil pan wouldnt work in conjunction with it. Its a VERY shallow oil pan.
The starter on the RX8 is on the engine side, rather than on the tranny like the RX7. What do you plan to do about it?
The renesis sits VERY low in the rx8 engine bay. So low that its easier to change the spark plugs with it up in the air. As a result the intake looks pretty damn tall. I'm not sure it would fit in our engine bay and still clear the steering rack.
should be a bit better with the FB's lighter weight.
GREAT comments and suggestions. Thank you. The web site is registered for the project. It will be ready in a few days.
http://www.1bad7.com
Pics on Tuesday 01/13
#44
Originally posted by 1stRX8
Target is more than 800lbs lighter than the 8. I will try the math to estimate acceleration. High 4's 0-60?? Probably better - A stock FD - 255hp/2850lbs 0-60 in 5.0. This car est.2200lbs/280+hp. Ohhhhhh Yeah!
GREAT comments and suggestions. Thank you. The web site is registered for the project. It will be ready in a few days.
http://www.1bad7.com
Pics on Tuesday 01/13 [/B]
Target is more than 800lbs lighter than the 8. I will try the math to estimate acceleration. High 4's 0-60?? Probably better - A stock FD - 255hp/2850lbs 0-60 in 5.0. This car est.2200lbs/280+hp. Ohhhhhh Yeah!
GREAT comments and suggestions. Thank you. The web site is registered for the project. It will be ready in a few days.
http://www.1bad7.com
Pics on Tuesday 01/13 [/B]
Again not to argue but just my 2cp. Good luck on the car its going to be the first of many in my eyes.
Last edited by speed7; 01-11-04 at 10:29 PM.
#45
FD > FB > FC
You also might want to see what was different in the renesis that was in the RX-EVOLV concept car. The power rating for that was 280HP. Since its the same basic motor, it makes sence that you would be able to get above 280 if you mod the mod the car right.
Also after driving the rx8 numerous times, it really lacks torque. Just for ***** and giggles, ya might try with the idea of a small supercharger to get that thing to get up and go faster. The rx8 doesnt really seem to make much power till you get around 5K or so.
I mean your going all out on this, so why not see if you can help the torque while your at it?
Also after driving the rx8 numerous times, it really lacks torque. Just for ***** and giggles, ya might try with the idea of a small supercharger to get that thing to get up and go faster. The rx8 doesnt really seem to make much power till you get around 5K or so.
I mean your going all out on this, so why not see if you can help the torque while your at it?
#46
Full Member
Thread Starter
Join Date: Aug 2003
Location: Houston
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Eh not to argue, but I've driven an Rx8 and I have a stock Rx7. Unless you plan on making the cars footprint considerably larger then the stock 7 I don't think you'll beat out a stock FD. Don't get me wrong its going to be an AWESOME car but the power on the 8 is towards the end of the powerband were as the power on an FD starts alot sooner. Around 3k since the turbo's. And going back to my "footprint" comment. The tires are wider on an FD vs an FB. So you can lay more power down.
#47
Full Member
Thread Starter
Join Date: Aug 2003
Location: Houston
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Also after driving the rx8 numerous times, it really lacks torque. Just for ***** and giggles, ya might try with the idea of a small supercharger to get that thing to get up and go faster. The rx8 doesnt really seem to make much power till you get around 5K or so.
Doeas anyone have tips on sleepy eyes for the head lamps? has it already been done, or do I have to invent it? Please say it already exists.
#48
True, power vs weight ratio is a huge consideration. Hence motorcycles.. they always win and don't have nearly as much power. I'm with you on the widebody kits though, the car is perfect and the stock look is nice. The only kit I really like is the one from Mariah
http://www.mariahmotorsports.com/ima...r/m4silv1a.jpg
We all like to dream, hell a 280hp street legel NA Rx7 is something all us rotor heads like to hear.
http://www.mariahmotorsports.com/ima...r/m4silv1a.jpg
We all like to dream, hell a 280hp street legel NA Rx7 is something all us rotor heads like to hear.
#50
So little time and money
Join Date: Feb 2003
Location: NorCAL
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
You mean like this?
I don't think there is a full kit out there because of the inherent dangers of modifying your lighting system. Should be lots of info on the forum if you do a quick search.
I don't think there is a full kit out there because of the inherent dangers of modifying your lighting system. Should be lots of info on the forum if you do a quick search.