Removing Seats
Removing Seats
06-03-02, 12:47 AM
#2
Senior Member
Join Date: Mar 2002
Location: Okotoks, AB, Canada
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
i am sure that the mazda service manul available at many fine bookstores across north america would have pretty pictures and in-depth how to guides on this very topic... or perhaps a search on the forums could yeild some results.
cheers'
cheers'
06-03-02, 12:48 AM
#3
Are you Nucking Futs?
Join Date: May 2001
Location: Abilene, TEXAS
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
unbolt the four bolts holding the tracks to the floor, they are 14mm I believe.
Read sig.
scoot the seat all the way forward and recline it all the way forward to get the back bolts, then slide it all the way back for the front ones.
Read sig.
scoot the seat all the way forward and recline it all the way forward to get the back bolts, then slide it all the way back for the front ones.
06-03-02, 12:48 AM
#4
Senior Member
look under the front and rear of the seat...on left and right (so 4 in total)..bolts...just undo them...seat should come right out....
the bolts might be hidden under some carpet though
the bolts might be hidden under some carpet though
06-03-02, 01:06 AM
#6
Old [Sch|F]ool
12mm sockets, but yeah, they just fall right out, two in the front, two in the back, and that's all!
I used to take the passenger seat out all the time for better cargo-hauling ability. Then I just LEFT the seat out - nobody ever sits there anyway.
I used to take the passenger seat out all the time for better cargo-hauling ability. Then I just LEFT the seat out - nobody ever sits there anyway.
06-03-02, 02:46 AM
#7
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
I just fully stripped out the interior of my car for an upcoming drag meet where I am going stupid. All thats in the car at the moment is a drivers seat and a dash 
Pics, vids and dyno runs will be available this weekend
Pics, vids and dyno runs will be available this weekend
Trending Topics
06-04-02, 03:21 AM
#11
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Im hoping for a 10 straight off the trailer!! 
Car is running great and hard, the backside has dropped out of the temperature lately and the car feels really strrong!
Car is running great and hard, the backside has dropped out of the temperature lately and the car feels really strrong!
06-04-02, 10:59 AM
#12
Tennis, anyone
You striped the insides ?,,what, are you making it just
a drag car ? have you weighted the stuff you removed ?
have you ever thought about putting a sand bag ,,
(full of sand ) in the back,over the rear axle, it's weight
(cheap)that can be moved around to help hook-up.
it makes a difference,,try it,,you'll be pulling the front
wheel(s) off the ground..C-ya mate.
a drag car ? have you weighted the stuff you removed ?
have you ever thought about putting a sand bag ,,
(full of sand ) in the back,over the rear axle, it's weight
(cheap)that can be moved around to help hook-up.
it makes a difference,,try it,,you'll be pulling the front
wheel(s) off the ground..C-ya mate.
