Removing the rear light lens?
#29
Tennis, anyone
There are 3 parts to the taillights, first, is the outer (clear) second is the coloured lens, ( red, yellow, white
for reverse) and third is the main body (where the bulbs
plug in) The clear outer is held to the main body by 2
(clear plastic) pieses that run through to the back of the main body. when you look at the back you'll see 2 holes
with clear plastic (heads) holding the outer clear cover.
I used some wire cutters and cut the heads off of the 2
pieses, and the clear covers come right off. when i reassembled the taillights i used glue where the heads
were and i've got no leaks
for reverse) and third is the main body (where the bulbs
plug in) The clear outer is held to the main body by 2
(clear plastic) pieses that run through to the back of the main body. when you look at the back you'll see 2 holes
with clear plastic (heads) holding the outer clear cover.
I used some wire cutters and cut the heads off of the 2
pieses, and the clear covers come right off. when i reassembled the taillights i used glue where the heads
were and i've got no leaks
#30
diablolical1:
www.rotaryrx7.com , a site owned by Jose Reyes (he's on the boards here).
Mark Perez:
Thanks man! I noticed that on my GS, that they were both broken off. My right lense had previously been caulked on, so i did similar w/ the left.
Peace
Geoff
www.rotaryrx7.com , a site owned by Jose Reyes (he's on the boards here).
Mark Perez:
Thanks man! I noticed that on my GS, that they were both broken off. My right lense had previously been caulked on, so i did similar w/ the left.
Peace
Geoff
Thread
Thread Starter
Forum
Replies
Last Post