Rear just ate it on my 83 GS, need donor
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Waco, Tx
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Rear just ate it on my 83 GS, need donor
found an 82 GSL rear but am wondering what else do i need, do i need the driveshaft?
i know i need the poprtional valve and master cylinder, and as many lines as possible for the hand brake and all, but am i overlooking something?
i know i need the poprtional valve and master cylinder, and as many lines as possible for the hand brake and all, but am i overlooking something?
#2
Driven a turbo FB lately?
iTrader: (1)
I got a 84 GSL rear on my 85... I didnt change the master cylinder or anything and it seems fine...
I think the pinion flange will need to be swapped from your 83 to the 82 rear end and you will need the e brake cables from the axle. Other than that you should be ok.
I think the pinion flange will need to be swapped from your 83 to the 82 rear end and you will need the e brake cables from the axle. Other than that you should be ok.
#3
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Waco, Tx
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Ill have to look at the third member tomarrow, but i think its fine after the look around tonight with th elighter... Alls i know is I need this fixed ASAP seeing as its my DD right now, and with school and all this sux bad,
so i dont need the mstr cyl or port valve?
ive heard most people say no biggie, but i figure if i can find one in time ill grab it
so i dont need the mstr cyl or port valve?
ive heard most people say no biggie, but i figure if i can find one in time ill grab it
#4
Driven a turbo FB lately?
iTrader: (1)
I didnt change mine, it had no problem stopping the car at about 115 mph... Just got to remember stock brakes are good for maybe 1 stop like that and then afterwards they require a LONG TIME to cool down, not to mention better be running better than stock pads...
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM