Rear Axle Swap
09-22-05, 11:43 PM
#1
That's Weak Sause
Thread Starter
Join Date: May 2004
Location: Idaho
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Rear Axle Swap
I've seen a few 8.8 ford axles and built GSL/-SE axles. Has anybody ever used a Pinto rear axle?
My neighbor is giving me one set up for first gen 7s with a posi err limited slip, all it needs is axle shafts.
Would it be a worth while swap and what kind of power can in take.
Thanks,
Eric
My neighbor is giving me one set up for first gen 7s with a posi err limited slip, all it needs is axle shafts.
Would it be a worth while swap and what kind of power can in take.
Thanks,
Eric
09-25-05, 08:33 PM
#5
I've found some very good info on the Ford rear ends, on the Ford and Mustang forums. The Pinto rear, imho, would be way to weak and a waste of time. I used to drive them when they were new, they are not any where near what a 7 is, even when modded.
