Scruch

SUPER MAZDATRIX!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

they have me send the package from america!!!! the packet is now in transit in the airport, (they have me phone today) ... WONDERFULLL!!!!!! i have do the order SUNDAY and today the parts are in europe!!!!


And i have buyed with europe visa, now it WORK!!!!!!!


i hope fryday is here! so i can change it!

Scruch

... more news! FED EX has confirmed, the package was sended today morning, at thise moment is in the airport of indianapolis, and thursday IS HERE!!! FANTASTIC!

bliffle

I've bought a LOT of parts from Mazdatrix, always a good experience.

Let us know how your experience goes. I'm thinking of sending one of my FBs to our house in Darkest France (Aveyron). So. I have two problems to solve: parts, and storage while I'm not there. I can haul small bits back and forth, and I expect storage to be OK if I use MMO in the gas (and maybe fog the engine when I leave) and redline or some additive in the gear cases.

B

Scruch

Ehi !!!! look the parts are arrived in only 4 days !!!! look the foto:






Tomorrow or saturday i will try to do what have you all say me =) i hope will go all good! =)


now i have also the manual that help me =)

jeremy

iTrader: (1)

you're car looks sweet. goodluck with it all.

RotorMotorDriver

iTrader: (1)

Wow 4 days? Thats faster than I got my parts, and Im only two states up from them . Oh well, Im glad it was a good buying experiance for you, Ive always had good luck with them . Once again, be sure to let us know how it all goes!

~T.J.

Scruch

i've tried to dismount the carburator for reach the gasket mainfold with no results, on tuesday i'll go to a mechanic to do that. Really the carburator is simple to dismount but to remount it.. i think for me its impossible... so that i prefer to bring the auto to a mechanicker....

Rotor13B

Be carefull of just using that jack if your getting under the car, They are notoriously unstable. I would get some ramps or jack stands instead.

Scruch

oh yes, then i have put under the road for security a few piece of wood =)

RotorMotorDriver

iTrader: (1)

You dont need to take the carburator off. Just take the 6 (I think) bolts off that hold the intake manifold on, then take it off as one whole unit. There are 4 bolts and 2 nuts as I remember. You also need to disconnect the throttle linkage cables (can be tricky), both the fuel lines, and all the vacuum lines from the rats nest.

But, if youre not comfortable doing all that, by all means, take it to someone who can .

~T.J.

Scruch

thanks T.J. (like my second name, Tiziano Junior, when i was young all friends and parents call me TJ)


but today i was in 11 differente mechanicker!!!!! all the morning and the aftornoon driving arround monza and milano searching and tracking new mechanicker that can help me.. NO ONE!!! would help me nobody know how to fix the rx7... and all they say "no no we dont want thise car, too complicated, bla bla bla bla"




my grandfather wont that i sell it, and buy like a new golf, or a bmw, but i have replyied him "NOOOOOOOOOO" but i hope to find how to fix thise water dispersion!!!!!!


Now i will retry without smount the carburator.. but do you use special tools? why i dont think to reach the bolts ...

680RWHP12A

what part of italy are you in? my friend is from italy, his family still lives there, they can help you , yes?

you have a beautiful car!!!

Scruch

Hi 680RWHP12A

Yessss i needdd help from your friend ehehhe =) i leave in MONZA near Milano =) where the GranPrix is =)

i need much help to refix thise car, why i am not much able to work engine for now!

THANKSSSSSSSSSSSSSSSSSSSSSSSSS

680RWHP12A

oppps my friend lives in Matera , in the south , sorry

bliffle

If you MUST remove the carb from the manifold, one of the nuts requires a special bent 12mm wrench. You can buy one, for a fabulous price, but what we do is to buy a cheap 12mm wrench and hammer it into about the right shape on an anvil. You can also saw the wrench and weld it back together with the right bend.

There's a picture of the bent wrench somewhere (if you're desparate I'll hunt for it), and it's very likely that any decent Italian mechanic has one, since I seem to remember using that same wrench on Alfas and Ferraris 40 years ago!

B

pratch

it doesn't require the wrench - it is merely speeds up the process. I used to remove my carb with a standard set of open end wrenches. Now with the emissions removed, that tool is of even less value to me - unless I get another stock 7 soon

bliffle

I thought maybe a crowsfoot wrench would reach it, too.

I swear that 12mm warped wrench was required for Italian cars!

B

Scruch

tomorrow i will change the gasket i have also buyed all the tools that you guys have say it in thise post, i hope will go evrething good =)


cee you tomorrow =) ihihihih and thanks

Rotaryhaven

iTrader: (17)

Si bisogna di aiuto mi poui scrivermi a jerry12315@***.net il mio itlaliano non e perfecto ma fra noi due posiamo capire cualcosa. Sempre ho pezzi qui in casa di Mazda. Mi manca la pizza di Italia. Prosciutto, funghi, salamino, un po di vino, donne, che bella vita....