1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Question for you wide body guys

Thread Tools
 
Search this Thread
 
Old 03-13-05 | 11:41 PM
  #1  
evil_motors's Avatar
Thread Starter
Slide Or Die
iTrader: (3)
 
Joined: May 2004
Posts: 1,076
Likes: 0
From: Dayton, OH
Question for you wide body guys

What were the specs on the rims you got to fill out the new wide fenders... ? like the offset and where did you get them,,, pics would help
Old 03-14-05 | 12:57 AM
  #2  
MakoVai's Avatar
Full Member

 
Joined: Feb 2005
Posts: 75
Likes: 0
From: portland or
I'm running 15x10 in the back and 16x8 in the front. I cant remember the offset. But I have a spare and I'll measure tommorow for ya.
Old 03-14-05 | 02:35 AM
  #3  
trochoid's Avatar
Old Fart Young at Heart
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 7
From: St Joe MO
I have a set of old school Epsilons. 15x8 front, 15x10 rear. I don't know what the offset is, but with the CPRacing wb kit, (which I think is a knock off of the old Pacifica kit), they tuck in too much. Still in the process of installing the kit, almost ready for paint. I will probably need to find spacers close to 2" to fill the fenders.

I believe the Epsilons were originaly sold with the Mariah wb kit.
Attached Thumbnails Question for you wide body guys-pc040020.jpg  
Old 03-14-05 | 12:00 PM
  #4  
luiml73's Avatar
Rotary Powered Boobies
iTrader: (1)
 
Joined: Oct 2001
Posts: 2,530
Likes: 0
From: Miami Beach
www.ccwheel.com 17x12 4 1/2 inch backspasing (5 1/2 is stock) I wanted to bring out the wheel closest to the fender without having to go 17X13



Attached Thumbnails Question for you wide body guys-picture-027.jpg   Question for you wide body guys-picture-036.jpg  
Old 03-14-05 | 08:25 PM
  #5  
FMYStreetRacer's Avatar
Junior Member

 
Joined: Mar 2005
Posts: 46
Likes: 0
From: Ft. Myers, Fl.
i was told (still haven't measured yet) 15x10.5 out back and 8.5 up front. BBS 3 peice race rims.
Old 03-14-05 | 09:14 PM
  #6  
steve84GS TII's Avatar
FB+FC=F-ME

 
Joined: Jul 2004
Posts: 3,353
Likes: 5
From: Rohnert Park CA
Completely depends on the type of body kit and if you run SE underpinnings or not.The SE stuff pushes the wheels out more and there are lots of widebodies out there,some mild some wild.
Mine is a Mariah Mode 1.Pretty tame in the width department.Along with an SE rearend and a 12" front brake kit,I went with 17X8 and 17X9 Advan RG's.The offset was limited for a 4 lug application so I choose the deepest I could get at about 32MM.Then I used spacers to push them out.HR makes some very good quality, hubcentric spacers if you still need 5-10-15mm of push to fill in the gap.However they only come in SE lug patterns.


Old 03-15-05 | 12:50 AM
  #7  
FMYStreetRacer's Avatar
Junior Member

 
Joined: Mar 2005
Posts: 46
Likes: 0
From: Ft. Myers, Fl.
Originally Posted by steve84GS TII
Completely depends on the type of body kit and if you run SE underpinnings or not.The SE stuff pushes the wheels out more and there are lots of widebodies out there,some mild some wild.
Mine is a Mariah Mode 1.Pretty tame in the width department.Along with an SE rearend and a 12" front brake kit,I went with 17X8 and 17X9 Advan RG's.The offset was limited for a 4 lug application so I choose the deepest I could get at about 32MM.Then I used spacers to push them out.HR makes some very good quality, hubcentric spacers if you still need 5-10-15mm of push to fill in the gap.However they only come in SE lug patterns.



congrats on car of the month on mazspeed.
Old 03-15-05 | 01:10 AM
  #8  
DAVID GRIMES's Avatar
How About A Cup Of STFU
 
Joined: Sep 2004
Posts: 1,552
Likes: 0
From: ALBANY, GA
Wheels/Tires: ICW 15x9, Cooper Cobra 225/50r15 R 205/50r15 F with 4.25 x 4 spacer adapters 1 1/4" thick

As indicated above, each body kit has its own requirements and/or limitations. Add to that individual likes / dislikes.

For example, I can't stand tires that hang out of the wells excessively. Also, I just can't get used to the huge rims with almost no tire look ( like 17" and 18" rims with 30 or 35 series sidewalls ). Whether it's a sports car or an SUV, that looks like some real fat guy wearing some pumps.
Old 03-15-05 | 01:28 AM
  #9  
trochoid's Avatar
Old Fart Young at Heart
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 7
From: St Joe MO
LOL^^^^ and in size 16 pumps no less.
Old 03-15-05 | 11:33 PM
  #10  
steve84GS TII's Avatar
FB+FC=F-ME

 
Joined: Jul 2004
Posts: 3,353
Likes: 5
From: Rohnert Park CA
Yea,but unlike a fat guy in pumps,they are nimble.So long as you dont hit any bad potholes,the rubberband tires like mine are super responsive.
Old 03-15-05 | 11:56 PM
  #11  
DAVID GRIMES's Avatar
How About A Cup Of STFU
 
Joined: Sep 2004
Posts: 1,552
Likes: 0
From: ALBANY, GA
Sorry. I meant to say a fat guy in pumps with CATLIKE REFLEXES !!!
Old 03-16-05 | 10:31 PM
  #12  
kuhlrx7's Avatar
Unconfirmed
 
Joined: Oct 2002
Posts: 632
Likes: 0
From: florida
I have the pacific 7 piece wide body kit ( yeah its pacific not any other mis sp version) it is more mild than than some others on width about the same with as the mariah mode 1 I have 15x8.25 on front w 4.5 back spacing and 15x9.25 on the rear with 4.5 back spacing like every one else said it depends on your kit and your likes.what kit do you have or are you getting?
Old 03-17-05 | 05:28 PM
  #13  
evil_motors's Avatar
Thread Starter
Slide Or Die
iTrader: (3)
 
Joined: May 2004
Posts: 1,076
Likes: 0
From: Dayton, OH
I was planning on getting the GTO-1 from mariah ... i think it looks sweet... do you have pics of your car?
Old 03-17-05 | 07:06 PM
  #14  
Snapshot's Avatar
Senior Member

 
Joined: Mar 2004
Posts: 503
Likes: 0
From: GA
Originally Posted by kuhlrx7
I have the pacific 7 piece wide body kit ( yeah its pacific not any other mis sp version) it is more mild than than some others on width about the same with as the mariah mode 1 I have 15x8.25 on front w 4.5 back spacing and 15x9.25 on the rear with 4.5 back spacing like every one else said it depends on your kit and your likes.what kit do you have or are you getting?
I have the Pacific kit on my 81 & looks about like the Mariah Mode 1 to me also. Have HRE wheels on it now w/ Yoko AVS Intermediates but am not completely happy.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tylerx7fb
1st Generation Specific (1979-1985)
39
05-27-19 01:45 PM
BNR34RB26DETT
Build Threads
42
02-28-18 12:27 PM
Clacor
Single Turbo RX-7's
0
08-14-15 10:17 AM



Quick Reply: Question for you wide body guys



All times are GMT -5. The time now is 08:37 AM.