Question for those with the Respeed brake kit
#51
The General RE
Originally Posted by Rico Suave
pics of the proyect
#52
The General RE
Originally Posted by Dan_s_young
I believe you first of all need the spindles from a 84-85. The bearing spacer that the kit comes with is press fitted onto the spindle.
TII 4 piston calipers, brake lines that mate into the stock hardline and into the calipers, brake pads, brake pad hardware kit, rotors, TII grease seals, and at a bare minimum the TII inner wheel bearings. It is probally a good idea to get new outter wheel bearings at the same time.
TII 4 piston calipers, brake lines that mate into the stock hardline and into the calipers, brake pads, brake pad hardware kit, rotors, TII grease seals, and at a bare minimum the TII inner wheel bearings. It is probally a good idea to get new outter wheel bearings at the same time.
#54
Born 2 Brap
iTrader: (1)
Originally Posted by Dan_s_young
Same length yes, but where it connects into the caliper is different. As you can see the TII caliper uses 2 crush washers and a banjo bolt type design. I used the SS braided Mazdatrix TII lines (4 pot).
Note you may want to replace your brake hardlines because the stock hardline tends to rust and weaken (at least it did on my car).
Heres a picture of everything you need:
Note you may want to replace your brake hardlines because the stock hardline tends to rust and weaken (at least it did on my car).
Heres a picture of everything you need:
Where are your hubs? heheh
#55
love the braaaap
I don't believe you have to use the banjo fitting. Standard FB SS lines should work. The Mazdatrix lines have a flare like a regular brake line on the end that connects to the caliper, and the caliper has the inverted flare to accept a regular brake line, so the two just mate up like a regular steel hardline. All you would have to do if figure out a mounting location for the center of the flex line. Oh ya, there is no evidence of any banjo bolt ever being on these calipers.
The pics suck, I know. But mabey you can make them out?
The pics suck, I know. But mabey you can make them out?
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM