Tremold

ok so i really don't know **** about the whole porting deal. so first off if someone could explain that more to me or direct me to a site that'd explain it to me that'd be good. second i was looking into getting the holley carb. & intake for my 84 gsl & was wondering if i should get it ported first? like, does the porting affect what kind of intake & carb. i get? liek i said i don't know **** about that so if anybody could help me out i'd appreciate it.

Rx-7Doctor

iTrader: (13)

http://www.mazdatrix.com/s.htm

Ken7102

i have a motor that has a holley and it isn't ported, works fine

Keith13b

iTrader: (6)

Think changing the cam on a piston engine!

Scroll through this page and look for the info on porting.....

http://www.rebuildingrotaryengines.com/

Typically carbs are set up differently for porting than stock. If you know you will do a port job on your rebuild, then buy the carb jetted for a ported engine. Just my .02 cents.

deadphoenix52

iTrader: (2)

http://lmgtfy.com/?q=porting+a+rotary+engine

rx71king

iTrader: (6)

are you going to port your engine. let me no i have a couple of tips and techniques that may help.....for first timers......

Tremold

hey, thanks a lot guys. deff. helped me out.. i appreciate it.

Jeezus

iTrader: (4)

https://www.rx7club.com/showthread.p...eet+peripheral