Pic of me racing @ Summit Point, WV
#1
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
Pic of me racing @ Summit Point, WV
Did a track day at Summit Point over the summer, heres the only pic I have on my computer, had to crop it to keep it under the size limit, but you dont miss much.
#3
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
Yeah both of those guys passed me, the M3 was lightly modded, the WRX in front of me had a 2.5 motor swap, FMIC, 3 inch full exhaust and numerous other motor mods but besides the rims his suspension was stock.
I kept gettin on his *** in the corners but he'd blow me away in the straigts (that seemed to be the story of the day.
I came out of the corners with enough speed (could only pass on the straights) to pass a Neon SRT-4, RSX type s, stock wrx, and 80's 911 (driver wasnt to into it, it seemed), and a 80's Nissan 200sx turbo or something.
But for 25 minutes of track time straight and $40 it seemed like a good deal.
With my new motor, see sig, I should be able to hold my own a little better.
I kept gettin on his *** in the corners but he'd blow me away in the straigts (that seemed to be the story of the day.
I came out of the corners with enough speed (could only pass on the straights) to pass a Neon SRT-4, RSX type s, stock wrx, and 80's 911 (driver wasnt to into it, it seemed), and a 80's Nissan 200sx turbo or something.
But for 25 minutes of track time straight and $40 it seemed like a good deal.
With my new motor, see sig, I should be able to hold my own a little better.
#6
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
Originally Posted by BlackRX7Turbo
sweet pic.... I'm surprised the guy in the Subi didn't just let you pass ... or maybe you could have pulled off into the pits and go back out again to help make some room....
Trending Topics
#8
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
umm not sure of the names but I ran on the smaller 1.1 mile track not the larger one,
this was at hyperfest over the summer,
over all a good time watching real drifters get out there (ran on the big track)
and the beginners, who didnt do so well save a newer GT mustang and a 240sx (they were also running the smaller one at differesnt times than me)
2 of them wrecked their cars pretty badly, a 240SX and a new WRX
this was at hyperfest over the summer,
over all a good time watching real drifters get out there (ran on the big track)
and the beginners, who didnt do so well save a newer GT mustang and a 240sx (they were also running the smaller one at differesnt times than me)
2 of them wrecked their cars pretty badly, a 240SX and a new WRX
#10
Isn't track time just a great way to spend time?
That new motor will really help, especially that aluminum flywheel.
Some 4.444 gears and Miata or RWD 626 semi close ratio tranny would really lower track times too. Then there's Panhard Rod and DOT R's.......
That new motor will really help, especially that aluminum flywheel.
Some 4.444 gears and Miata or RWD 626 semi close ratio tranny would really lower track times too. Then there's Panhard Rod and DOT R's.......
#13
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
A guy named Greg with a handlebar type mustache
He was pretty cool and gave me great tips but he was like "you lowered the car too much" because I had some bumpsteer, he told me I must have cut the springs or something.
Also said my rims were to big (cant argue but I got a good deal on em, 17 konig Imagines for $420 shipped with tires) And he didnt like how much it backfired.
BTW I have RB springs and Tockico Illuminas set to 4 on the front and 3 on the rear
He was pretty cool and gave me great tips but he was like "you lowered the car too much" because I had some bumpsteer, he told me I must have cut the springs or something.
Also said my rims were to big (cant argue but I got a good deal on em, 17 konig Imagines for $420 shipped with tires) And he didnt like how much it backfired.
BTW I have RB springs and Tockico Illuminas set to 4 on the front and 3 on the rear
#15
Originally Posted by Supper
looks like tons of fun man. Too bad the only track within an hour of me is a quarter mile straightaway.
Closest track is 1 1/2 hours, at Pocono... that I know of...
#18
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
The srt-4 guy kept pullin on me hard on the straights but I would be going real slow behind him in the turns stayin right on his ***.
So I suppose his instructor made him wave me by.
After a few more times through some turns he wasnt slowed down by me at all on the straights b/c I kept puttin more ground on him in the curves.
So I suppose his instructor made him wave me by.
After a few more times through some turns he wasnt slowed down by me at all on the straights b/c I kept puttin more ground on him in the curves.
#19
Originally Posted by BlackRX7Turbo
Same here...
Closest track is 1 1/2 hours, at Pocono... that I know of...
Closest track is 1 1/2 hours, at Pocono... that I know of...
#20
they do... sad thing is, I'm an NNJR-PCA club member (through my bro) and they get to go there (Pocono) for ridiculously cheap.... but it's Porsche only!! They actually do a lot of tracks (the PCA that is) really cheap... Mid-Ohio was cool.... 1 of 2 RX's that was there... the other one was my instructor (in a CYM)....
#22
Thread Starter
1st gens only
iTrader: (6)
Joined: Oct 2002
Posts: 1,125
Likes: 0
From: Ormond Beach, FL
good to know
I was just going with that setup b/c thats what I usually use for autox as to induce some oversteer (we have very tight courses for the most part).
Ill try the 4 2 and 4 1 setups next time.
I was just going with that setup b/c thats what I usually use for autox as to induce some oversteer (we have very tight courses for the most part).
Ill try the 4 2 and 4 1 setups next time.
#25
Right near Malloy
iTrader: (28)
Joined: Dec 1999
Posts: 7,847
Likes: 513
From: Behind a workbench, repairing FC Electronics.
Virginia plates! Did you at one point goto Northern Virginia Community College?
I can't remember if the RX-7 I saw there a year or two ago was "1984 RX-7" or "1985 RX-7"
I believe it was an SE... At that time it was K3 Sunbeam Silver...
I can't remember if the RX-7 I saw there a year or two ago was "1984 RX-7" or "1985 RX-7"
I believe it was an SE... At that time it was K3 Sunbeam Silver...