1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

oil pressure to high and to low

Thread Tools
 
Search this Thread
 
Old 12-15-05 | 08:05 PM
  #1  
shar's Avatar
Thread Starter
Junior Member

 
Joined: Nov 2004
Posts: 18
Likes: 0
From: Hunstville, Al
oil pressure to high and to low

My 12a is running about 90psi @max rpm.
when running at 3000rpm the psi is at 55 or so. when at idle its steady at 20psi.
this is being read at operating temp and with a auto gauge not the dash.
the engine has only 11000 miles and the oil has been the same with havoline 10w-40.
Would like to know if the return regulator could be the problem or if anything else could be causing this.
Old 12-15-05 | 10:16 PM
  #2  
trochoid's Avatar
Old Fart Young at Heart
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 7
From: St Joe MO
Doesn't sound like a problem. Those are similiar readings to what I get with my Autometer on a fresh rebuild. In fact, it will hit 125 on cold starts. I do have the 85 psi opr and shimmed the relief regulator, but your's sound fine.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
andyvideopro
General Rotary Tech Support
3
08-20-15 10:55 AM
eddierotary
2nd Generation Specific (1986-1992)
4
08-16-15 04:12 PM



Quick Reply: oil pressure to high and to low



All times are GMT -5. The time now is 02:29 PM.