nitrous question. dont be hatin' NOT A NOOB
#52
Originally Posted by perfect_circle
what would be a suitable size as far as running lines is concerned?
IF your talking about fuel supply to the fogger I would just use what ever the factory size fuel line is and buy the correct size T. The N20 line is supplied with the kit.
#53
Rotary Freak
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Thread Starter
Join Date: Jun 2003
Location: Land Of Confusion southern MI, USA
Posts: 2,604
Likes: 0
Received 1 Like
on
1 Post
I probably wont buy a kit. i will probably just piece it together. and i will be able to find the right fittings to run a rubber line to a fogger for fuel?
#56
Banned. I got OWNED!!!
Join Date: Jun 2006
Location: South East
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
i've always run the NOS sniper kit. worked great on my FB holley setup and i will be using it under the blow-thru holley setup on my current TII. don't be scuuurrred of the nitrous. it's fuggin great ![Wink](https://www.rx7club.com/images/smilies/wink.gif)
i use an aeromotive FPR that has multiple outlets, and just run two to the carb and one to the fuel solenoid. 3/8 line size. 6psi base pressure. wot switch. one very good fuel pump on the fb and will be running twin pumps on the TII but those are in the tank and come out in one single feed line. so it's still the same.
i also use water injection tho so i don't really retard timing.
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
i use an aeromotive FPR that has multiple outlets, and just run two to the carb and one to the fuel solenoid. 3/8 line size. 6psi base pressure. wot switch. one very good fuel pump on the fb and will be running twin pumps on the TII but those are in the tank and come out in one single feed line. so it's still the same.
i also use water injection tho so i don't really retard timing.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM