new 1st Gen logo for rx7club
08-19-04, 01:12 PM
#76
Originally Posted by Glazedham42
Thanks for the vote Wankelguy. 
Just a small correction. Us hilljacks in Indiana call those "bins". A silo is much taller and skinnier but serves the same purpose as a grain bin does. That farm in the back is actually my Grandparent's farm. And just think, every couple of years you get to climb up and paint a fresh coat of silver on those bad boys. Also, you have to go inside of them and clean them out every year. It is also EXTREMELY dangerous to climb inside of them because the grain can be like quicksand. It will pull you in and you suffocate. My great grandfather got stuck in one when I was a kid. He was in there for several hours and finally they got him free and pulled him out. Very scary stuff being sucked under by a sea of corn seed. Sorry for the farming lesson...... way off topic...
KEEP POSTING GUYS!
Just a small correction. Us hilljacks in Indiana call those "bins". A silo is much taller and skinnier but serves the same purpose as a grain bin does. That farm in the back is actually my Grandparent's farm. And just think, every couple of years you get to climb up and paint a fresh coat of silver on those bad boys. Also, you have to go inside of them and clean them out every year. It is also EXTREMELY dangerous to climb inside of them because the grain can be like quicksand. It will pull you in and you suffocate. My great grandfather got stuck in one when I was a kid. He was in there for several hours and finally they got him free and pulled him out. Very scary stuff being sucked under by a sea of corn seed. Sorry for the farming lesson...... way off topic... KEEP POSTING GUYS!
My FFA project was raising two bummer lambs, "Debbie" and "Donna".
But, I digress...
08-19-04, 03:51 PM
#80
1983 GSL, 1987 323 "GX"
Join Date: Jun 2004
Location: Las Cruces, NM
Posts: 2,265
Likes: 0
Received 0 Likes
on
0 Posts
I had thought of getting a second gen and painting it the exact same color. The day I went to the dealership with the CASH, he had sold it about twenty minutes before that.
So, I spent the money ($1500) on my 83 and a GTO. Only got the GTO for such a good deal because it was my boss, and he got a new GTO, and promised I could buy that one off him dirt cheap
So, I spent the money ($1500) on my 83 and a GTO. Only got the GTO for such a good deal because it was my boss, and he got a new GTO, and promised I could buy that one off him dirt cheap
08-19-04, 05:27 PM
#85
Certified User
Join Date: Aug 2004
Location: Right near da beach, boiiy.
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I'm a 2nd gen guy. Got 2 of them, but I really wish my vert was a 1st gen. Next car I get is gonna be a 1st gen.
Not that it would matter,, but I don't mind if you put a 1st gen in the middle bigger than the other 2. they were first. But I might request a different 2nd gen, or at least chang eit to a pic of the front (keep it s5) s5 has those crappy mouse belts, but they look better.
Do you think the other rotary is making a banner for their forum section??
What if instead of having a link to each section in words (on the main page), that we had the current banner as a link to the 2nd gen, one of yours for the first gen, and a third gen for the third?
Originally Posted by slashdawg00110
Of the 3, I like the middle one the best. It has the most interesting view of the car.
Not that it would matter,
, but I don't mind if you put a 1st gen in the middle bigger than the other 2. they were first. But I might request a different 2nd gen, or at least chang eit to a pic of the front (keep it s5) s5 has those crappy mouse belts, but they look better. Do you think the other rotary is making a banner for their forum section??
What if instead of having a link to each section in words (on the main page), that we had the current banner as a link to the 2nd gen, one of yours for the first gen, and a third gen for the third?
08-19-04, 05:34 PM
#86
Rotary Enthusiast
iTrader: (1)
Join Date: Feb 2004
Location: Waterloo & Mississauga, Ontario, Canada
Posts: 838
Likes: 0
Received 1 Like
on
1 Post
About mine, someone asked about the rotor being only in the third banner, I tossed it there to see if anyone notices it, and if so, if they think it looks good, I can easily put it on the others, or even remove it.
08-19-04, 07:22 PM
#88
I read your email
Thread Starter
For all you guys making images, make sure they're sized to be a drop in replacement for the above. That would be 752x85 pixels. If they're sized right then that'll be one less push-back that we could get for not using our voted pick. See what I mean?
08-19-04, 08:27 PM
#93
TT 1st gen ? We'll see !
Join Date: Jan 2003
Location: Ottawa, Canada
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys ! I've posted all the pics on my website so that we can see them all at once ...
http://mikehunt2.no-ip.org/new_banner/
To upload your own pics, go here:
http://mikehunt2.no-ip.org/upload_photo/
(sorry it's in french :P was orriginally intended for a french public mouhaha )
Still post your pics here though ... the site is just so that we can see them all in whole
See ya !
Eric.
http://mikehunt2.no-ip.org/new_banner/
To upload your own pics, go here:
http://mikehunt2.no-ip.org/upload_photo/
(sorry it's in french :P was orriginally intended for a french public mouhaha )
Still post your pics here though ... the site is just so that we can see them all in whole
See ya !
Eric.
08-19-04, 08:29 PM
#94
Rotary Enthusiast
iTrader: (1)
Join Date: Feb 2004
Location: Waterloo & Mississauga, Ontario, Canada
Posts: 838
Likes: 0
Received 1 Like
on
1 Post
I've split apart my banners, and resized them as per Innitab's post.
EDIT: If any of you guys have any ideas to add to this, or even to see it with a few colours changed, let me know.
EDIT: If any of you guys have any ideas to add to this, or even to see it with a few colours changed, let me know.
Last edited by darkfrost; 08-19-04 at 08:32 PM.
