EvilWankel

iTrader: (2)

Well I'm getting pretty close to getting the engine together. I've never had a car with a carburetor before, so I'm kinda lost on what to use as far as jets, tubes, etc. The setup will be a street ported 13b (ported with pineapple racing templates), and a full 2.5" exhaust. I guess I need to know everything, open to all suggestions.

I know the top spot with the wing nut holds a couple things, I'm unsure what they are. I took them out once to look at the numbers and such, but I'm not sure what is what, and what the numbers mean.

Also I would like some information on where to get the parts (tubes, jets, and so on) to swap out, and also maybe a PDF or something of the sort on the carb so I understand where everything is? Thanks to all.

Jeezus

iTrader: (4)

Here is a thread that helped me, mostly about 45's:

https://www.rx7club.com/showthread.p...ighlight=weber

installer67

iTrader: (18)

I have some pdf.'s that I couldn't put up on that thread due to size limitations, if you want them, send me you email in a pm and I'll send em too ya.
-Ray