MIKE-P-28

iTrader: (1)

Hey guys, I was gonna rebuild my 12A and I got all the needed parts minus the seals etc. But as you know Im gonna go a different route. I want to sell all these parts. Whats the best way, sell them individually or find someone that needs all of it?

Everything is in near perfect condition and all parts are from an 85...

2 good rotor housings
all the cast iron housings (good but need to be lapped)
1 good front rotor
3 good rear ones
2 dizzys (1 complete, 1 missing 1 igniter)
2 85 carbs
2 E shafts
2 flywheels (1 83, and 1 85)
85 intake manifold w/ AAV and other block off plates
79-85 RB Power Pulses Bretaher w/ K & N filter

All parts have been cleaned fully

So whats the best way to sell them, and how much should i ask?

mar3

iTrader: (8)

It should be painfully obvious by now that the members here skate on the "pay-less" side, so I wouldn't be surprised if some people suggest letting it all go to one person for $300. That said, will you take $250?


And the vultures start to gather....

MIKE-P-28

iTrader: (1)

Id do the whole 12A core for $300

Thjat would be 2 near perfect rotor housings, all 3 cast pieces, e shaft and 2 good rotors for $300

By the way if you want something free I have a tranny outta an 80, its free

I thought id give every1 here first pick, its gonna go to Ebay otherwise

4ohfour

Well, my 12a (1984) isn't starting so I might be interested in some/all of those parts.

Drop me a message at gnanke@cadvision.com or ICQ me at 26966912, PM me on the forum if that floats your boat, or you could go to the top of the tallest hill and make a fire out of green trees and... ok it's getting a little long i'll shut up n...

cheers'

MIKE-P-28

iTrader: (1)

Dont have ICQ, but I just emailed you, I need to know what parts you want?

MIKE

MIKE-P-28

iTrader: (1)

OK if no one wants any of it, im going to the parts trader and ebay

rx7forever

What you asking for the RB powerpulse n K&N?

Felix Wankel

Hey I need that dizzy that's minus an igniter to finish the single dizzy swap on my RX-2's 12A. I have some extra igniters already.

MIKE-P-28

iTrader: (1)

The power pulses breather. The paint on top has peeled, needs a repainting. Of course I never cared for the white anyways... Make an offer, I was thinking of $20 you pay shipping...The breather was $44 and the K & N was $41, but im open to suggestions.

Dont really know what a Dist. is worth ? Make an offer...

MIKE-P-28

iTrader: (1)

By the way if anyone wants to swap some stuff for all the parts to put a 13b in a 12A chassis. Im open for that too.

Need front cover (unless my 12A will work) , oil pick up, oil pan, and front mount

Felix Wankel

I have an -SE oil pan I'll trade for the dizzy.

MIKE-P-28

iTrader: (1)

Ok sounds good, mikep28@bellsouth.net

I can mail in the morning... Wouldnt happen to have the oil pick tube too?

Felix Wankel

I don't believe I have the pickup. I can check and see, but I remember just having the pan.

Anyone need a 12A cover with an oil return tube welded in already?

MIKE-P-28

iTrader: (1)

You talking about where it will return for the turbo?

Felix Wankel

Yeah, but someone cut the flange off of it. Just the tube is left. It would be good for someone running an aftermarket turbo, so they could put AN fittings or whatever they wanted on it. I bought my TII to put ist drivetrain in my FB, but the TII turned out to be a semi nice car. Now I don't need the cover and oil pan. I'm gonna keep the FB non turbo and autox it.

MIKE-P-28

iTrader: (1)

Im gonna be using that cosmo motor. Im trying to get as many parts together as I can before the faithful day I get the motor here. I haven't even seen where the turbo oil return even is. So Id be kinda flying by nite there...

Felix Wankel

I dont think you need another oil pan with the Cosmo engine, because they mount like the REW's do, by the rear housing. AJC13B or setzep should know better than I do.

MIKE-P-28

iTrader: (1)

Yeah and setzep aint online dammit....

Just send me the detail via email and I'll get the dizzy out to ya and let you know about the oil pan

Anything else you can think of that I may possiby need?

piston pounder

Hey mike, how much would you sell me one of the rotor housings for?. Im in colorado.

MIKE-P-28

iTrader: (1)

I got one that is perfect, and the other has a small flake about the size of your pinky nail at the top.

I bought them off parts trader in nov. and never used them I paid $212 shipping and all. What would you pay?

1Bad85Rex

I'll give you $400 for all of it, reply ASAP as I really need to do a rebuild SOON

MIKE-P-28

iTrader: (1)

Ok its yours Gonna email ya, or email me at mikep28@bellsouth.net

You need to find shipping from 42303 area code...
Everything is probally close to 300 lbs, so it would have to go freight, but your pretty close to me, so would be too awful bad. Where in NC are ya?

peejay

Could ya mail me some of the old apex seals?

MIKE-P-28

iTrader: (1)

I could I got a bag of old stuff, from 2 or 3 motors. But all of its wore out... theres a good 1mm or so, missing off some of them...

Kinda depends on if this guys wants the stuff or not, dunno if he does? I was gonna sell everything as a package deal.. So dunno, have to wait and see.