1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

My windows = teh suck!!

Thread Tools
 
Search this Thread
 
Old 05-22-04, 03:45 PM
  #1  
Junior Member

Thread Starter
 
Join Date: May 2004
Location: With YZFs Sister
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
My windows = teh suck!!

Alright, I need help dammit!

Both of my windows keep coming out of their tracks. I have completely taken both doors/windows apart, cleaned every damn inch of the tracks, but it seems like after I roll them down + up (they're manual) a couple times, they come out of their tracks and I have to "help" them back up. It's aggravating, because I've tried everything I can think of.

Anybody have any ideas?
Old 05-22-04, 03:50 PM
  #2  
Dom
callin' tokyo

 
Dom's Avatar
 
Join Date: Dec 2002
Location: Windsor, Ontario
Posts: 1,353
Likes: 0
Received 0 Likes on 0 Posts
Probably a worn plastic gromet where the window attaches to the mechanism.
Old 05-22-04, 03:55 PM
  #3  
My wife bought me 2 RX-7s

 
MosesX605's Avatar
 
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes on 2 Posts
The tracks can be adjusted by losening their bolts and sliding to a new position. If you fiddle with the adjustment, you'll be able to get those windows rolling again.

Last edited by MosesX605; 05-22-04 at 04:18 PM.
Old 05-22-04, 03:57 PM
  #4  
Junior Member

Thread Starter
 
Join Date: May 2004
Location: With YZFs Sister
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
I've tried that... It seems like they get knocked loose when the doors are closed. I've bought "new" (in other words, different) hardware off of ebay, I've changed as much other crap as I can... I think I'll just go steal somebody's doors.
Old 05-22-04, 04:33 PM
  #5  
Rotary Enthusiast

iTrader: (14)
 
Slammed_GSL's Avatar
 
Join Date: May 2004
Location: Drifting a Roundabout near you!
Posts: 1,366
Likes: 0
Received 10 Likes on 10 Posts
Are the windows pushing the track out(the track thats in the door) specificly the front track under the A pillar?
After you get it back on the track, cycle it up and down a couple of times and watch that track. Is pressure pushing it outboard or inboard? if outboard, try some shims(washers) on the inside on the 10mm bolt, between the door and the track that holds that track inplace or use a lock washer incase it's just getting loose on you. I just replaced the track liner for my drivers side door because it came off the track the liner was shot. The liner might be worn on yours. They are not cheap but they seal up nice and you only change them out every 10years or so.
Just some ideas and experiences.
Good luck
Old 05-22-04, 04:35 PM
  #6  
Junior Member

Thread Starter
 
Join Date: May 2004
Location: With YZFs Sister
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Yeah, they seem to pop out from the track under the A-pillar. It pops out of the track so that the track is towards the outside and the window drops down and rides along the inside.
Old 05-22-04, 04:45 PM
  #7  
FD Daily

iTrader: (26)
 
K-Tune's Avatar
 
Join Date: Jul 2003
Location: Gulf Breeze, FL
Posts: 3,308
Likes: 0
Received 13 Likes on 13 Posts
it seems like there would be a small piece of plastic that's worn out and causing it.


does it only happen when you close your doors with the windows down? i hate it too
Old 05-22-04, 05:01 PM
  #8  
Rotary Enthusiast

iTrader: (14)
 
Slammed_GSL's Avatar
 
Join Date: May 2004
Location: Drifting a Roundabout near you!
Posts: 1,366
Likes: 0
Received 10 Likes on 10 Posts
I forgot about the plastic. This is the piece that is in the holes that the window is bolted in with, if those are worn, replace them and make sure the lip is on the under side of the glass and not shifted or broke off.
Good catch drift...
Old 05-22-04, 05:52 PM
  #9  
Junior Member

Thread Starter
 
Join Date: May 2004
Location: With YZFs Sister
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by FBDrifter
it seems like there would be a small piece of plastic that's worn out and causing it.


does it only happen when you close your doors with the windows down? i hate it too

It happens if the door is closed too hard with the windows up or down.

It happens when the door is closed with the windows down or halfway down.

It's really the only thing about the car I dislike.
Old 05-26-04, 11:29 AM
  #10  
recycled teenager

 
Bob Holton's Avatar
 
Join Date: Feb 2004
Location: Jackson MI USA
Posts: 837
Likes: 0
Received 0 Likes on 0 Posts
I bought my parts car specifficaly to steal the window regulators. Having to stand in the rain and help the windows, while my nice dry wife laughs is a pain.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DocHoliday89
Power FC Forum
11
02-18-18 01:35 AM
turbojeff
3rd Generation Specific (1993-2002)
8
10-05-15 10:50 AM



Quick Reply: My windows = teh suck!!



All times are GMT -5. The time now is 09:00 AM.