On my way to painting
04-23-08 | 09:54 PM
#76
the intake i made my self on a 3axis CNC and also made the water temp sensor manifold.
I did paint over the POR15 were i had too, like the lower valance panels and the little bit on the bumpers. I sprayed my primer 2 coats and then 2 coats of color and 2 coats of clear. By the 2nd coat of primer it was not noticeable. but the paint does not adhere all that great on the POR 15, from my experiences i would avoid it if all possible.
I did paint over the POR15 were i had too, like the lower valance panels and the little bit on the bumpers. I sprayed my primer 2 coats and then 2 coats of color and 2 coats of clear. By the 2nd coat of primer it was not noticeable. but the paint does not adhere all that great on the POR 15, from my experiences i would avoid it if all possible.
