MAYDAY!MAYDAY! Somebody save my ass!!!
09-05-01, 09:39 PM
#1
It's Back!
Thread Starter
MAYDAY!MAYDAY! Somebody save my ***!!!
I picked up a used motor the other day and tonite I started getting it ready to install. Everythings going pretty well except for the engine wiring loom. I have the vacuum rack solenoid things on (color coded snap-ons) as well as the carb plugins.
My problem lies with a bundle of connections that are located just around the snap in to the back of the alternator. I cannot find a place for these and there are 3 of them. Can someone shoot me an easy diagram or maybe a picture of the engine bay? I really am at a loss on this; I spent an hour tonight just studying the engine, trying to figure out what I was missing.
The engines not in the car yet it hanging from a block and tackle in my garage. I just can't seem to find where these last couple of things connect. Anyone know?
Almost forgot it is a 12A engine out of an '85. the car and wiring harness is '84 12A I don't think that should matter though.
one more thing, isn't the alternator supposed to have a ground wire or something? I remember the little bolt on the back but I don't see the wire or where its supposed to lead to.
My problem lies with a bundle of connections that are located just around the snap in to the back of the alternator. I cannot find a place for these and there are 3 of them. Can someone shoot me an easy diagram or maybe a picture of the engine bay? I really am at a loss on this; I spent an hour tonight just studying the engine, trying to figure out what I was missing.
The engines not in the car yet it hanging from a block and tackle in my garage. I just can't seem to find where these last couple of things connect. Anyone know?
Almost forgot it is a 12A engine out of an '85. the car and wiring harness is '84 12A I don't think that should matter though.
one more thing, isn't the alternator supposed to have a ground wire or something? I remember the little bolt on the back but I don't see the wire or where its supposed to lead to.
09-05-01, 10:24 PM
#3
Full Member
Join Date: Aug 2001
Location: Lewiston, Maine / Orlando, Florida
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
I took a look at mine, which is a 12a as well... no ac tho...
this is what I found:
There are only three wire harnesses/clips that I can see. They go to the alternator, thermostat, and a device that is located at the bottom of the carb.
Also, the ground cable that goes to the alt is located on the cabling that runs up to the bottom of the distributer.
here are some pics i borrowed from David Pitt... THANX DAVE!
this is what I found:
There are only three wire harnesses/clips that I can see. They go to the alternator, thermostat, and a device that is located at the bottom of the carb.
Also, the ground cable that goes to the alt is located on the cabling that runs up to the bottom of the distributer.
here are some pics i borrowed from David Pitt... THANX DAVE!
Trending Topics
09-05-01, 11:59 PM
#8
Full Member
Join Date: Aug 2001
Location: Lewiston, Maine / Orlando, Florida
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
U mean that is it???!!!!
Well then... I am very glad to have helped!
Also... if anyone wants to know where I got the pics... go here
THANK YOU Pittdp for allowing Superslinc to get out of this tight spot...
Ok all... case seems closed....
Well then... I am very glad to have helped!
Also... if anyone wants to know where I got the pics... go here
THANK YOU Pittdp for allowing Superslinc to get out of this tight spot...
Ok all... case seems closed....
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
06-03-24 03:25 PM
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM