Jdm FD steering wheel adaption
12-09-08, 07:19 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Hunstville, Al
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Jdm FD steering wheel adaption
I got a used FD wheel for dirt cheap buddy of mine was going to use it if it wouldn't mount. Worked out great. I've got to get a pick of the wheel in the car. These are the pics of what I modified.
This was the rear mount for the stock wheel. After I cut the horn plate off, I glued it to the bottom of the FD wheel. The stock turn signal cam worked fine I had cut some of the length off the ends from when I had a after market on the car but it still reached the wheel just fine.
I used a socket on the ring with some weight to get a good adhesion.
This was the rear mount for the stock wheel. After I cut the horn plate off, I glued it to the bottom of the FD wheel. The stock turn signal cam worked fine I had cut some of the length off the ends from when I had a after market on the car but it still reached the wheel just fine.
I used a socket on the ring with some weight to get a good adhesion.
12-14-08, 03:59 PM
#3
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Hunstville, Al
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Sorry it took so long to get photo up my software doesn't work for vista I had to hook up my old desktop to download.
I think the wheel was recovered because the leather is absolutely perfect. The other thing is I've seen one on a right hand car that has the perferated grips.
I think the wheel was recovered because the leather is absolutely perfect. The other thing is I've seen one on a right hand car that has the perferated grips.
