Intake idea
#1
Beware Of Squirrely Wrath
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: May 2002
Location: SW Washington
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
Intake idea
I woke up in the middle of the night last night, and had an idea for an intake. So while searching through pics to try to find one that I could use to illustrate it, I found this one. It may be exactly what I was thinking about.
The piece between the headlights, the way it is ported, is this for an intake? If so, how good is this particular setup, or does anyone know?
Thanks,
Brian
![](http://66.119.195.113:81/carpics/82573rotor.jpg)
The piece between the headlights, the way it is ported, is this for an intake? If so, how good is this particular setup, or does anyone know?
Thanks,
Brian
Last edited by BrianHeston; 12-09-03 at 01:44 AM.
#3
Beware Of Squirrely Wrath
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: May 2002
Location: SW Washington
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
Once I saw it, I kinda figured that's what it was desgined for. Would it be possible to adapt it for use as an intake though? Would there be any advantage? More volume/ colder air?
Brian
Brian
#4
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jul 2002
Location: Perth, Western Australia
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
well if you put a cai in there it would be ok. Just make sure you have a good filter because any crap the cars infront throw up will go straight into your intake.
#5
Airflow is my life
![](https://www.rx7club.com/images/misc/10_year_icon.png)
The radiator would block that, unless you make it turn sideways and go thru the side of the rad shroud (like the CAI in our tutorial). A spot thats wide open is the headlight bucket.
#6
Beware Of Squirrely Wrath
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: May 2002
Location: SW Washington
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
I knew it would have to turn around the rad, and that it would need an extra high quality filter, but I figured that it would also provide a little more air, and cooler air at that. The headlight pass through method is tried and true, but I just don't really like the looks of the one headlight intake. And buying/making the drivers headlight assembly to match, just doesn't seem practical.
Besides, this is just a random thought that woke me up in the middle of the night, so I guess the fact that it's slightly practical is at least worth it.![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
Brian
Besides, this is just a random thought that woke me up in the middle of the night, so I guess the fact that it's slightly practical is at least worth it.
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
Brian
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM