P_Lav

I have had some leaky injectors, and the cars been in the shop all week to get them out, and a few other repairs. I got them out today, and my insulators are completely mangled (they're tear shaped unstead of round), but nothing else looked obvious to me. And I would like to ask you guys who have had leaky injectors and solved them. I have order some new o-rings, gromets, etc. Everything but the plastic clip that the electrical connectors go to, and the injectors themselves. Now, from your guys experience with this, are new seals and insulators good enough to stop the leaking, or do I need to go further and have the whole injector sent out, rebuilt, or order some new ones.

Rx-7Doctor

iTrader: (13)

Did you have an external fuel leak that you saw coming from the injector area?

P_Lav

I'm not posistive, but the injectors were really filthy.

Rx-7Doctor

iTrader: (13)

If there was no fuel on the outside area of the injectors or surronding area then they are not leaking externally or have leaking O'rings.

If you were having a flooding problem with the engine then 1 or both may be leaking internally or have a bad spray pattern.

trochoid

iTrader: (6)

Send them out for cleaning and testing. Witch Hunter, R C Engineering, Cruiz Performance, etc..

P_Lav

I know you guys are from the states, but is there anyone in Canada you would know of...

3rd and final 7

iTrader: (9)

you can always call in diesel injector cleaning place sometimes they will do them they flow them, clean them and reflow them.