Im all fogged up.....
#1
Senior Member
Thread Starter
Join Date: Sep 2001
Location: Simi Valley Ca.
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Im all fogged up.....
Hey
Im a newbie...driving in the rain....in my first gen for the first time.......and the car fogs up big time........
The only way I can get some relief is to assist with the AC unit.....
Is there a trick..........or a proven method to regulate clear windows?
P.S. my AC Compressor is shot.......does not put out and makes noise......and i am missing a tab in the rear for my defroster........
So I reallly need help......
Thanks
Jim
Im a newbie...driving in the rain....in my first gen for the first time.......and the car fogs up big time........
The only way I can get some relief is to assist with the AC unit.....
Is there a trick..........or a proven method to regulate clear windows?
P.S. my AC Compressor is shot.......does not put out and makes noise......and i am missing a tab in the rear for my defroster........
So I reallly need help......
Thanks
Jim
#2
Round&Round not Up&Down
Join Date: Aug 2001
Location: West Bloomfield, MI
Posts: 2,805
Likes: 0
Received 0 Likes
on
0 Posts
You could try that Rain X Anti-fog stuff. I used it on my motorcycle helmet faceshield. It worked pretty well.
Does your windshield defroster not work?
I have heard of ppl soldering the tab back on for their rear defroster, but good luck... it seems to work about 25% of the time.
Does your windshield defroster not work?
I have heard of ppl soldering the tab back on for their rear defroster, but good luck... it seems to work about 25% of the time.
#3
EliteHardcoreCanuckSquad
Join Date: Mar 2001
Location: Toronto
Posts: 2,653
Likes: 0
Received 0 Likes
on
0 Posts
For your rear defroster. Get out your handy 40watt or 35 watt soldering iron and some solder and in about 10secs you'll have a rear defroster back...
I snapped one off years ago and that worked like a charm.
If you don't have a spare tab, try bending a wire crimp after taking the plastic off the crimp end. Should work.
I snapped one off years ago and that worked like a charm.
If you don't have a spare tab, try bending a wire crimp after taking the plastic off the crimp end. Should work.
Thread
Thread Starter
Forum
Replies
Last Post