thelittlefatmailman

Hey guys I have serched for this, and I just can't find anything on it, my idle speed screw on my carb has that little cap thing over it, and I was lookig in the manual, and it looks to me like u have to get some tipa little tool thing that pokes in there, and alowes you to get the cap off.

were can I get this little qeer tool from??

do I have to use that, or can I use something else???

thanks for any help ahead of time!!

DavidMyers53

It just pops off. I removed mine a few months ago while doing a carb rebuild and didn't use any special tools on it...

- David

Ovid213

I cut mine off using a dremel with a cutting wheel, vertically right down the center. You just have to be careful.

trochoid

iTrader: (6)

FSM and the carb manual both show how to remove it, of course it 'must' be replaced with a new one after setting the carb. lol.

thelittlefatmailman

Hey thanks for the help guys!

I have tried to get it off by just popping it off with random stuff and everything, but I can't seem to get it.....ill try more stuff, thanks guys

trochoid

iTrader: (6)

Needs to be cut off. Pry on it enough and you can damage the needle or threads.