I need help with Webber carb and intake installation!
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Shoreline, Wa
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
I need help with Webber carb and intake installation!
I took off the nikki, and am putting on the Webber side-draft and intake from Rotaryshack. I Have tons and tons of hoses and wires and what nots that are going to be hanging off into no-where... is there any tutorials or anything? I just want my engine bay to be clean with no loose or useless hoses/wires. The big frikin huge wire thing taped together with the solenoid plugs... what of all this do i need/ will i need?
#2
Blood, Sweat and Rotors
iTrader: (1)
Ditch all the hoses except fuel hose to the carb and brake booster vacuum hose on the intake manifold. Plug the fuel return line real good as it goes to the gas tank.
Zip tie the wires together. You may be able to unplug them from the harness but it's been years since I had a factory harness in my car.
Brad
Zip tie the wires together. You may be able to unplug them from the harness but it's been years since I had a factory harness in my car.
Brad
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM