Hydraulic Clutch line
#1
Full Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Jun 2005
Location: Michigan
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Hydraulic Clutch line
I just rebuilt my master and slave cylinder, however I had to cut the line that connects the two cylinders. Does anyone know where I can get this line besides the dealership? I have tried a couple of auto parts stores and they do not carry it.
Thanks.
Thanks.
#2
www.mazdatrix.com
remember that site it will help you in the future.
:edit: are you talking about the steel line that runs on the firewall,or the flexible line that goes from the steel line to the slave?If it is the steel line you will have to make up your own line to replace that,because noone makes one that fits to my knowledge.It shouldn't be too hard to do.just buy a length of brake line with the proper flare,and thread,and,bend,cut,reflare,and install.
remember that site it will help you in the future.
:edit: are you talking about the steel line that runs on the firewall,or the flexible line that goes from the steel line to the slave?If it is the steel line you will have to make up your own line to replace that,because noone makes one that fits to my knowledge.It shouldn't be too hard to do.just buy a length of brake line with the proper flare,and thread,and,bend,cut,reflare,and install.
Last edited by Mazdax605; 11-28-05 at 12:05 PM.
#5
Full Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Jun 2005
Location: Michigan
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I did cut the rubber hose, the problem is that I will still need to buy them both since the rubber hose and steel line are fused together. Thanks for the info I will order the pieces today.
Thread
Thread Starter
Forum
Replies
Last Post
NCross
2nd Generation Specific (1986-1992)
9
09-03-15 03:42 PM