using the stock front end, how would you set up a FMIC


should I just find the biggest one I can fit in there or what, what about intercooler piping size, what should I run?

direct freak, mike p-28 im looking in your direction.

 

heres how i did it mine, [IMG]C:\Documents and Settings\Owner\My Documents\My Pictures\IC_pre_shot.jpg[/IMG]

 

not sure how that red X would look on the front of my car.

 

http://www.cardomain.com/member_page...=260761&page=2
check his page, and hes posted it up a few times
i'll post pics of when i get mine all mounted up

 

should I mount it in the front opening if I can.

 

i dont know about that, it wouldnt be a good idea. will block alot of air to the radiator. the way i did it doest block the radiator too much. i wich i have a digi now so i can show you the front of my car

 

If I found one to cover half, should it be on the top or the bottom, I would think the bottom for more effinciency and looks.

 

Here is a Grand National IC with the necks cut off mounted up front. Was pretty easy to hook up.



eddierotary, I see you are running the small NPR in front of the Radiator and still using the stock mounting and radiator positioning. Will a big NPR fit that way also?

Later
Randy

 

yes, i have to cut a piece of them to fit my intercooler. i dont think the large one fits with the stock radiator mounting. you can ask directfreak.

 

I like the way that npr one is hooked up, but looks like a tight fit.

looks like the drivers side radiator panel is still there, is the passenger one still there. If it fits that well and I just have to cut a hole on each side of the red shroud im going to go with a npr.

 

is this the same npr intercooler,
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1875406236

as this one
http://www.cardomain.com/member_pag...d=260761&page=2

 

Nope, the one is the ebay has almost twice as many rows and the in/out are slightly larger.
I have one of the larger NPR (like the ebay add) that was in my musatng laying in the garage floor. Just yell if you need some demensions.

Later
Randy

 

i have both panels. my -se radiators panel came with the holes for the stock air box pipe, i try to fit the intercooler pipes thru the holes without cutting them but didnt work. and it looks a tight fit but is not. i can fit the battery and the cooland overflow bottle without no trouble. look like it came from the factory over there.
i can take meturment tomorow so you know how much i cut.

 

so I need the smaller size.,

what are the demensions on that smaller one.

thats the one I want.

 

what is a good price for one.

 

i payd for mine $179. plus shipping i see the around that price all the time.

 

I dunno if I ever took a pictur of mine installed, i just started cutting and making brackets...

You have to rely on your fabrication skills

Randy got mad yo fab skills

 

I can get you a large NPR IC for $185 + shipping

Thats if I can still get them.. Havent checked in a while?

 

Largest NPR Intercooler. Mounted upside down, with no cutting.




Home made bracket to hold it all in place.



I will have to trim a little of the reinforcment fom the header panel when I put it back on. Unless 1stRX7heaven finishes his vented header panels first.

 

that looks like you mounted the ic with an erector set
looooks bad asssss man

 

It does, but it works. It's real sturdy too.

 

yeah it looks nice and sturdy
that ic makes me

 

How many times you cut your hands messing with taht thing. and mounting it and such?
LOL

 

shhhhhhhh
youre interupting my drooling

 

Actually, Never. I've taken it on and off only a couple of times. It's just regular "L" brackets from Home Depot. It was better than having to weld anything.