how much power am i making?
#2
Off riding sportbikes!
Join Date: Aug 2002
Location: Vancouver Wa
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
Ok if I am reading this correctly than the motor is a stock port right??
With a stock port I am going to make a very uneducated guess @ Maybe 175HP
Streetport @ about @240....
With a stock port I am going to make a very uneducated guess @ Maybe 175HP
Streetport @ about @240....
Trending Topics
#9
Always waiting for parts!
iTrader: (2)
Im confused..I think you guys are thinking he has a 12a. he does have a 13b in the car since it says 88 engine block and 84 gsl se. If im not mistaken the 13b original was 135 hp stock. With the mods you have, I would guess you have about that to the rear wheels and about 150-160 at the flywheel.
Hey when you get the dyno done post it lets see who was closest.
Sean
Hey when you get the dyno done post it lets see who was closest.
Sean
#15
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 31,145
Received 2,799 Likes
on
1,981 Posts
140-145rwhp
#16
Absolute Power is Awesome
145rwhp? Someone explain why this engine would make anything more than slightly (5hp?) above a stock S4. With stock ports, a stock manifold and an SE ECU, only the exhaust could add anything over stock.
#18
Absolute Power is Awesome
Did you measure a difference with the MSD? I've talked to racers who dyno tested with and without MSD direct fire and measured no difference. I have the direct fire set up on my car too, but I couldn't feel any difference. By custom intake, are you taking about a cone filter? If it's still got the SE mass air flapper, a cone filter won't make much difference as the flapper is the bottleneck in that system. How many miles on the engine?
#23
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
i guess i'll tae a pic of my engine bay for you guys to show my intake setup. i'm not saying there was a gain nessecarily i'm just saying it pulls more at higher rpm than it used to. so it might have just modiffied teh power curves
#25
Will Work for Beer
Thread Starter
Join Date: Apr 2003
Location: Lincoln, Ne
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
the dyno got put off due to the fact that my tires are bald and have been on there for a good 60-70k. i havn't had the car that long but the previous owner told me how long ago everything was done. so i'm shopping for a good set of tires. but need not worry, i will post my dyno sheet