How does YOUR car start?
#27
Where did my 7 go?
Join Date: Jan 2002
Location: Burnsville, MN
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
With my Mikuni sidedraft on my 12, I pump the gas 4-5 times and crank. Starts right up everytime unless its way below freezing, then I need to give it half-choke and no gas and it starts right up.
#28
KARATE EXPLOSION
iTrader: (1)
both my 1st gens would start right up after a rev or two.
i had a fun little procedure when i started the '83: wedge a nickel behind the choke lever (my choke system was broken), put key into on position, let pump run for a few seconds, quicly push the pedal to the floor twice, turn the key and it fired. then i'd have to babysit it until the ornery carb warmed up.
the '84 -se wasn't as fun when it was running. put key in, turn key, let it do it's thing.
i had a fun little procedure when i started the '83: wedge a nickel behind the choke lever (my choke system was broken), put key into on position, let pump run for a few seconds, quicly push the pedal to the floor twice, turn the key and it fired. then i'd have to babysit it until the ornery carb warmed up.
the '84 -se wasn't as fun when it was running. put key in, turn key, let it do it's thing.
#30
8krpm is not enough
She's never failed me -- turn the key, 2-3 revolutions and she's fired and running like a champ. It doesn't matter if it's 90 deg F out or 15 deg F....I love that damn car...
#31
Say hello to Mr.Wankel
iTrader: (7)
?
Originally Posted by -xlr8planet-
A forum buddy sent me a video, his rotary starts as any other normal piston car, a revolution and thats it, it starts.
Mine sounds like an airplane, gets speed and then it starts.
The question is ..... why???
any ideas?
Mine sounds like an airplane, gets speed and then it starts.
The question is ..... why???
any ideas?
im not sure what you mean by sounds like a plane, but has just started to make a noise on start ups. it reminds me of the sound of a supercharger, but i definately dont have one of those. i think it has something to do with the fact that my tach just started going crazy. im going to switch out the alternater with a spare i have and the if it doesnt stop im going to get the batterie checked. hopefully it will fix both problems, if not, im heading after the ignitors.
#32
Rotary Enthusiast
Join Date: Aug 2004
Location: The World
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
hmm i counted mine today more carefully, basically it took about 3 output shaft rotations to start (just under), I counted about 8-9 exhaust pulses before it started up.
#33
SKELETOR!
Join Date: Mar 2003
Location: Prescott Valley, AZ
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
I hop in, turn on the battery cut off switch, pull out the choke to full, turn the key rrr..rrr.rrr....choke in......rrr..rr...popp blah pft pft blah pft pft.....running.
Thats only if I've had it running in the last 3-4 days. If not, its jump start or coast down the steep driveway time.
I have a battery drain I haven't been able to locate yet.
Thats only if I've had it running in the last 3-4 days. If not, its jump start or coast down the steep driveway time.
I have a battery drain I haven't been able to locate yet.
#36
FD > FB > FC
Originally Posted by flight_of_pain
mine is
jump in, turn key, rrrrrr...rrrrr..rrr.......r.rrr.r.r..r.rrr.r...rrr rr......click
push it down the block like an ******* and roll start it
isaac
jump in, turn key, rrrrrr...rrrrr..rrr.......r.rrr.r.r..r.rrr.r...rrr rr......click
push it down the block like an ******* and roll start it
isaac
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM