1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Holley 3/8" NPT Fitting

Thread Tools
 
Search this Thread
 
Old 08-15-07 | 10:46 PM
  #1  
FastFredd's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 30
Likes: 0
From: Phoenix, AZ
Holley 3/8" NPT Fitting

So I bought the Holley fuel regulator, however, I've been driving around Phoenix trying to the correct fitting (Checkers, Autozone, and NAPA), and no one has it! I need a 3/8" NPT to 1/4" hose fitting. Looking at a bunch of your guys' setup you are using these, but where the hell do you get them?
Old 08-15-07 | 11:34 PM
  #2  
Rx-7Doctor's Avatar
Lives on the Forum
iTrader: (13)
 
Joined: Jul 2004
Posts: 10,584
Likes: 12
From: Oregon
I bet that Napa is just out of them. But 1/4" hose? Is that for the return? You also have alot of speed shops there, don't you?
Old 08-15-07 | 11:52 PM
  #3  
Jeff20B's Avatar
Lapping = Fapping
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 83
From: Near Seattle
3/8 x 3/8 is what you're looking for. I know it seems odd but NPT regards the pipe inner diameter.
Old 08-16-07 | 01:01 AM
  #4  
notrotarypwrd's Avatar
^^no longer applies^^

 
Joined: Dec 2004
Posts: 106
Likes: 0
From: Orlando, Fl
just went through the same deal last week. Advance auto sold me the regulator but didn't have any fittings that fit it. After some searching around, autozone ended up having some in the back and charged me only a dollar for each one. I guess I got lucky that day and came across somebody that actually took the time to search.
Old 08-16-07 | 02:16 AM
  #5  
FastFredd's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 30
Likes: 0
From: Phoenix, AZ
I tried the 3/8 to 3/8 but the hoses that are on the car now don't fit it, they're just barely too small. Maybe the previous owner replaced the hoses with something smaller? Has anyone else used a 3/8 hose connection (implying they have a 3/8 hose) on they're first gen RX7 for the fuel delivery?
Old 08-16-07 | 02:41 AM
  #6  
Sgt.Stinkfist's Avatar
premix, for f's sake
iTrader: (6)
 
Joined: Jun 2004
Posts: 1,438
Likes: 5
From: madison, WI
im using -6AN (essentially 3/8")for my feed to the regulator and -4AN for fuel return.

for feeding the regulator you can use a strait 3/8" barbed fitting and connect it w/ 3/8" fuel line. as for a 3/8"npt -> 1/4" fitting , im not sure where to get'em, you might have to buy an adapter.

i wouldnt reccomend doing it, but if you gonna try to clamp a 3/8" hose to your 1/4" return, ide suggest that you put a fat bubble flare on the end of the hard line to lessen the likelyhood of a fuel leak
Old 08-16-07 | 06:20 AM
  #7  
OneRotor's Avatar
RAWR
iTrader: (3)
 
Joined: Apr 2004
Posts: 3,860
Likes: 2
From: 90024
go to a hardware store and go into their brass fittings section. I found exactly what I needed there. 3/8" NPT x 5/16 hose barb. 5/16" fuel line fits best over the factory return. just be warned, it's a bitch to get the 5/16" hose barb into 5/16" fuel line.
Old 08-16-07 | 09:25 AM
  #8  
broke7's Avatar
Banned. I got OWNED!!!
iTrader: (1)
 
Joined: Sep 2005
Posts: 375
Likes: 2
From: georgetown in
go to your local parker store (they make hyd hoses) they should have any fitting you need to make it work
Old 08-16-07 | 02:11 PM
  #9  
bassrotor's Avatar
bassrotor

 
Joined: Jan 2007
Posts: 125
Likes: 0
From: kissimmee
Best place to buy fitting home depo

Originally Posted by FastFredd
So I bought the Holley fuel regulator, however, I'vebeen driving around Phoenix trying to the correct fitting (Checkers, Autozone, and NAPA), and no one has it! I need a 3/8" NPT to 1/4" hose fitting. Looking at a bunch of your guys' setup you are using these, but where the hell do you get them?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM



Quick Reply: Holley 3/8" NPT Fitting



All times are GMT -5. The time now is 12:17 PM.