hmm extra aluminum, what to do with it
#1
lightened fb
Thread Starter
Join Date: Aug 2004
Location: vancouver, bc
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
hmm extra aluminum, what to do with it
anti-flame message: ok some of you may think this is a waste of time, but for a trade student who is currently making 0$$ getting a bunch of free aluminum is a goldmine. and a great way to practice fabrication skills, and do some free mods the best mods of all...
so what will i do with it,
-well im going to be replacing parts that i cannot remove, that are generally non structural and can be seen (that way i can polish them up nice,) for example, i wanted to remove my winshield wiper mounts and accessories, but i sorta need them im in vancouver here, so why not replace them with aluminum, nice billet pieces in behind that vent thing going back and forth, just an idea/example.
- making custom brackets and stuff to hold accessories that may not be stock, aka making a custom headlight setup and such. or maybe mounting, my 2nd gen coils,
-my favorite project of all, making a tombraider style roof rack setup, to hold accessories such as my spare tire, backpack, and tools neccisary for going to the junkyard or for general transport. i got the idea off tombraider....
lol
so ya im going a bit aluminum crazy, cause i love aluminum, and i love the way it shines up nice, example my engine, and intake manifold,.
http://photobucket.com/albums/b345/a...t=DSC01196.jpg
http://photobucket.com/albums/b345/a...t=DSC01202.jpg
so what will i do with it,
-well im going to be replacing parts that i cannot remove, that are generally non structural and can be seen (that way i can polish them up nice,) for example, i wanted to remove my winshield wiper mounts and accessories, but i sorta need them im in vancouver here, so why not replace them with aluminum, nice billet pieces in behind that vent thing going back and forth, just an idea/example.
- making custom brackets and stuff to hold accessories that may not be stock, aka making a custom headlight setup and such. or maybe mounting, my 2nd gen coils,
-my favorite project of all, making a tombraider style roof rack setup, to hold accessories such as my spare tire, backpack, and tools neccisary for going to the junkyard or for general transport. i got the idea off tombraider....
lol
so ya im going a bit aluminum crazy, cause i love aluminum, and i love the way it shines up nice, example my engine, and intake manifold,.
http://photobucket.com/albums/b345/a...t=DSC01196.jpg
http://photobucket.com/albums/b345/a...t=DSC01202.jpg
#3
****ty Tune= Low #'s
make somewhat of a front scoop to direct the air better to the raditor...
im about to do that along with making buckets for custom lights....
i made some brakets awhile back using some 1/8" sheet for my efan since the plastic things that came with it were horrible
im about to do that along with making buckets for custom lights....
i made some brakets awhile back using some 1/8" sheet for my efan since the plastic things that came with it were horrible
#5
Savanna Rx-7
If you have some thin sheet aluminum, you can make a stereo surround like Nector suggested. I made one for mine, and I made it one piece it covers the AC controls, the stereo mounting, 5 guages, and the console for the shifter boot.
maybe I can dig up some photos of it later.
kenn
maybe I can dig up some photos of it later.
kenn
#6
Gen 1 4 life
Join Date: Jul 2004
Location: Apalachin NY
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
fab up sumthin for 2 lights instead of one in each popup.. like this http://www.cardomain.com/ride/451551
#7
haha i also am crazy when it comes to alluminum. I love how it looks after you been polishing it for hours ...I like how your block came out....Isnt that going to be a pain though once that engine has a few thousand miles on her? Its going to get all shitty
Trending Topics
#8
lightened fb
Thread Starter
Join Date: Aug 2004
Location: vancouver, bc
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
ya, im gonna be making some cool stuff with it, lots of replacement parts, lots of shiny stuff,. unfortunately all i got was strange shapes, and some long tubes, that are about 1" diameter, with a lip that comes out another 1 inch, (mainly for transforming hopsital room curtains,) but ill still be able to make some pretty cool stuff with it, maybe even some strut bars. cant wiat to get ater, \
now lets see what type of things you guys have made for fbs out of aluminum, replacement parts or w/e
now lets see what type of things you guys have made for fbs out of aluminum, replacement parts or w/e
#14
Airflow is my life
Ah thanks Paul, Im such a dinosaour.
Yea, that would be a blingin bracket.
The ISC piece is nice and worth the $. I use one on the racecar. And since I dropped my arr box project Im buying another for the DD.
Yea, that would be a blingin bracket.
The ISC piece is nice and worth the $. I use one on the racecar. And since I dropped my arr box project Im buying another for the DD.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM