1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Help! SE Misses a LOT!

Thread Tools
 
Search this Thread
 
Old 03-06-04 | 10:44 PM
  #1  
smnc's Avatar
Thread Starter
EliteHardcoreCannuckSquad
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
Exclamation Help! SE Misses a LOT!

I need some help with my SE.
It's kind of an odd problem.
The engine stumbles all over the place, in all gears, anywhere above 2k rpm. Even with my foot to the floor it won't break 7k rpm. What's more, it's somewhat intermittent. Somtimes I can rev to 4 k with no problems, other times 2k is the limit. The car also idles very rough, most of the time.

My first thought was fuel filter, but I've changed that, to no avail. I'm going to check voltage on the fuel pump tommorow. Otherwise, I'm thinking maybe the strainer in the tank?

Any other suggestions?
Old 03-06-04 | 11:26 PM
  #2  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
iTrader: (91)
 
Joined: Oct 2003
Posts: 21,911
Likes: 1,101
From: Ohio
have you checked thetiming? also, check to see if the injectors are getting proper voltage or if they are spraying properly. also, check the maf.
Old 03-07-04 | 12:22 AM
  #3  
YapaKanichi's Avatar
Smile Like a Donut
 
Joined: Feb 2004
Posts: 1,236
Likes: 0
From: Don't you wish you knew....
sounds like a street port to me, did you just buy the car?
Old 03-07-04 | 12:46 AM
  #4  
smnc's Avatar
Thread Starter
EliteHardcoreCannuckSquad
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
No... It was running fine until about a week ago. I don't see how anything would go wrong with the timing overnight? Plus, it's an occasional problem.

It feels like a fuel starvation problem to me...
Old 03-07-04 | 09:00 AM
  #5  
Steve Shulz's Avatar
Senior Member
 
Joined: Nov 2001
Posts: 566
Likes: 0
From: Gig Harbor, WA
When was the last time you cleaned (really cleaned) the intake path? Check your afm is it smooth?


Editing just to put in a sig is a pain in the ***!
Old 03-07-04 | 10:50 AM
  #6  
smnc's Avatar
Thread Starter
EliteHardcoreCannuckSquad
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
I'll be sure to check the intake system today too.
Old 03-07-04 | 05:34 PM
  #7  
MarkPerez's Avatar
Tennis, anyone
 
Joined: Jun 2001
Posts: 1,803
Likes: 4
From: SoCal.
to check your fuel flow, pull off the main fuel hose from the delivery pipe, remove the air cleaner top and eliment, turn the key 'on', use a finger to push open the flapper on the mas, that turns on the fuel pump, with the main hose off see how much fuel flow you have, should just flow !!. but other then that sounds like a vacum leak... my -SE runs rough,,it's the injectors working intermittiningly <? it happens.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 08:16 PM
rafgonz
Introduce yourself
3
09-07-15 07:36 AM




All times are GMT -5. The time now is 07:16 PM.