Help Quick!!!!
04-11-04, 04:26 PM
#1
You can choose this?
Thread Starter
Join Date: Oct 2003
Location: hoosier state
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
the oil line in the front of the block goes to the top or bottom fitting on the oil cooler? and the oil line in the back of the block (closer to the firewall) goes to the top or the bottom of the oil cooler?
04-11-04, 07:28 PM
#5
OMG!!! NO!!!
That's wrong!! You're going to blow your engine, with Oil Starvation!
If you run the car this way for even one minute it is doing major damage to your bearings and will seize your engine!!
I hope it's not too late!!
Just Kidding!!!
I am in one of those moods.
That's wrong!! You're going to blow your engine, with Oil Starvation!
If you run the car this way for even one minute it is doing major damage to your bearings and will seize your engine!!
I hope it's not too late!!
Just Kidding!!!
I am in one of those moods.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM