Hate the rust proofing resin goop in your engine bay?
#1
Respecognize!
Thread Starter
Hate the rust proofing resin goop in your engine bay?
So do i!
But my girlfriend discovered the best way to efficiently removed the stuff and usually wont even harm the paint ( it will remove the "overspray" paint).
PB Blaster and any higher end Carburetor Cleaner.
Spray on the PB. Then immediately spray on the Carb cleaner. The stuff just turns to nothing and you can just wipe it off without too much difficultly. May need more PB/Carb if some spots.
But we did the following in about 30 minutes.
But my girlfriend discovered the best way to efficiently removed the stuff and usually wont even harm the paint ( it will remove the "overspray" paint).
PB Blaster and any higher end Carburetor Cleaner.
Spray on the PB. Then immediately spray on the Carb cleaner. The stuff just turns to nothing and you can just wipe it off without too much difficultly. May need more PB/Carb if some spots.
But we did the following in about 30 minutes.
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 31,137
Received 2,795 Likes
on
1,979 Posts
man that paint is nice! wax it!
my current toy is ok, but without something to protect it, its a little thin here, and stained there..
my current toy is ok, but without something to protect it, its a little thin here, and stained there..
Trending Topics
#16
Banned. I got OWNED!!!
iTrader: (2)
lol ... always leg humping before anything else. I've used a similar technique cleaning mine. I just used WD-40 and also like you said it just basically wipes right off. Might also have to hit the heavier spot another time but that should be it. You'll need tons of towls though. I didn't use Carb cleaner though, I just did it all with WD-40 and just washed the engine bay after to get rid of the oil film that it leaves. Cheaper than buying a few cans of carb cleaner.
#17
Respecognize!
Thread Starter
i've noticed that the PB by itself does seem to do 90% of the work. Seems to be good for cleaning engines too.
and yes, she has a sister. But shes 17.
and yes, she has a sister. But shes 17.
#20
Waffles - hmmm good
iTrader: (1)
I hate to sound stoopid but what rust proofing guck are you referring to? Is this an FB thing?
My SA just has some greasy dirt on the inner fenders that I could clean off but its never bothered me enough to deal with it. Certainly never had any rust proofing film on it and I've had since 83.
My SA just has some greasy dirt on the inner fenders that I could clean off but its never bothered me enough to deal with it. Certainly never had any rust proofing film on it and I've had since 83.
#22
Lives on the Forum
mine has a sticker on the window stating some type of rustproofing system was used. Don't know if that's what produced the **** in my engine bay or not though...
#23
the rust proofing gunk is residue left from the notoriously leaky rotary engine.
Mazda engineers intensionally designed the engine to throw off oil onto the chassis to prevent rust.
Mazda engineers intensionally designed the engine to throw off oil onto the chassis to prevent rust.
#24
cams pistons valves
Join Date: Jun 2003
Location: LA
Posts: 3,004
Likes: 0
Received 0 Likes
on
0 Posts
[quote=Low Impedance;8235592]So do i!
But my girlfriend discovered the best way to efficiently removed the stuff and usually wont even harm the paint ( it will remove the "overspray" paint).
PB Blaster and any higher end Carburetor Cleaner.
Spray on the PB. Then immediately spray on the Carb cleaner. The stuff just turns to nothing and you can just wipe it off without too much difficultly. May need more PB/Carb if some spots.
But we did the following in about 30 minutes.
i say , its your daughter!
she was grounded and had to clean for punishment!
But my girlfriend discovered the best way to efficiently removed the stuff and usually wont even harm the paint ( it will remove the "overspray" paint).
PB Blaster and any higher end Carburetor Cleaner.
Spray on the PB. Then immediately spray on the Carb cleaner. The stuff just turns to nothing and you can just wipe it off without too much difficultly. May need more PB/Carb if some spots.
But we did the following in about 30 minutes.
i say , its your daughter!
she was grounded and had to clean for punishment!
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM