GSL-SE swap to SA potential problem?
06-05-08, 01:56 PM
#1
GSL-SE swap to SA potential problem?
I have an SA with a full GSL-SE suspension swap. I was wondering if 15x6.5 +14 with 195/55-15 would fit or not. This *is* technical because I know the offset of the standard wheels for the GSL-SE is +40 and a "6 width I believe.
Possible sticky material as well to determine wheels sizes for people who choose to GSL-SE swap suspension into an SA or Series 2/3.
The speedo will probably be pretty messed up with the 55mm height on the tire as well, huh?
Possible sticky material as well to determine wheels sizes for people who choose to GSL-SE swap suspension into an SA or Series 2/3.
The speedo will probably be pretty messed up with the 55mm height on the tire as well, huh?
06-05-08, 02:17 PM
#2
You would be moving the inside of the wheel outboard by ~ 3/4" and the outside of the wheel outboard by ~ 1 1/4"
Seems like a good bit towards the fender lip to me. Grab a ruler and see if your tire is currently 1 1/4" back from the lip.
-billy
Seems like a good bit towards the fender lip to me. Grab a ruler and see if your tire is currently 1 1/4" back from the lip.
-billy
06-05-08, 04:38 PM
#3
Nekurd
Join Date: Feb 2006
Location: California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
I did the same suspension swap on my SA and I noticed that with a +25 offset, it is really close to the springs, because of my tire size, and it is really close to the fender. But I even though it is close, I don't think they rub at all.
My setup: 16x7 with 205/50ZR16
But because our tire/rim sizes are different though so it might work for you. After mounting the wheels that I have now, I am not going to get anything other than a +25-35 offset rim.
My setup: 16x7 with 205/50ZR16
But because our tire/rim sizes are different though so it might work for you. After mounting the wheels that I have now, I am not going to get anything other than a +25-35 offset rim.
Thread
Thread Starter
Forum
Replies
Last Post
