Going TO JUNKYARD, what do you need?
#1
Rotartist
Thread Starter
iTrader: (13)
Join Date: Sep 2003
Location: Spring Hill TN 37174
Posts: 7,252
Likes: 0
Received 2 Likes
on
2 Posts
Going TO JUNKYARD, what do you need?
I am running to a new J-yard in town, has 12 rx-7's what do you need at a resonable price? put what the max you will pay for the part and I'll see if they have one and what they are asking, also will snap pictures to bring back unless I feel confident you WILL SERIOUSLY reiemburse me....then I will just buy the part and we'll arrange shipping.
trevor
I leave in about 2 hours so bring em on....
trevor
I leave in about 2 hours so bring em on....
#4
trainwreck
Ignitors for my GSL-SE. Possibly the entire distributor setup. Dunno how much they will charge, so if you could find out that would be very cool. Rear Window Wiper Motor. the Back Left Triangle Glass window. Radio Anteanna. I think thats it lol, srry bout the list. Prices and pics would be great.
Edit:
Also a Rats nest for a 85 12a. Just those little black things all in a row with the vac lines all over. I broke a couple nipples off of ours on accident.
Edit:
Also a Rats nest for a 85 12a. Just those little black things all in a row with the vac lines all over. I broke a couple nipples off of ours on accident.
Last edited by BigJim; 11-01-04 at 08:19 AM.
#5
Respecognize!
i am doing the electric 6th port thing that is one rotaryresurrection.com and i am really not sure. I was hoping you might know. I said i need to connect to the vacuum soleniods....but i am not sure i need additional ones or just the one i have...
Trending Topics
#8
Junior Member
Join Date: Oct 2004
Location: Orlando, Florida
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
My entire turn signal assembly (under the steering wheel) on my 84 GSL needs replacing. The car has cruise control.
Where would you be shipping the parts from?
Where would you be shipping the parts from?
#10
How About A Cup Of STFU
Join Date: Sep 2004
Location: ALBANY, GA
Posts: 1,552
Likes: 0
Received 0 Likes
on
0 Posts
I need a driver's side rear axle for a 1981 with rear drum brakes. I just need the flanged shaft. $45 plus shipping ?
Davidcgrimes@yahoo.com
Davidcgrimes@yahoo.com
#12
Rollin' coal and 53mpg!
IGNITORS. I'll take what you can get!
85 taillights
85 turn signal lens, front passenger bumper side
85 rear side marker lights, both sides
let me know what you find as far as a GOOD motor goes.
--Evan
infinite_redline@yahoo.com
85 taillights
85 turn signal lens, front passenger bumper side
85 rear side marker lights, both sides
let me know what you find as far as a GOOD motor goes.
--Evan
infinite_redline@yahoo.com
#14
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
gsl or gsl-se 3rd member. just the lsd, not the whole rear end. if possible that is, i know that's kind of a big request, but let me know if they have one
#15
Darth Suppah
Join Date: Jul 2004
Location: So dubbed by teh Poops!
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking for a power steering setup for an 83 or that I can rig onto my 83.
Also looking for LSD rear end and disk brakes. Preferable something from a GSL, so the -SE stuff can be kept out on the streets instead of getting hammered on a rally car.
Also looking for LSD rear end and disk brakes. Preferable something from a GSL, so the -SE stuff can be kept out on the streets instead of getting hammered on a rally car.
Last edited by Supper; 11-01-04 at 10:50 AM.
#16
Junior Member
Join Date: Oct 2004
Location: Orlando, Florida
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I'd be interested in finding out how much they would want for the full SE brake conversion parts (i.e. rear axle shafts, rear rotors, rear calipers, front discs, front calipers, and anything else needs to convert).
Should be a drop-in fit for my 84 GSL.
Should be a drop-in fit for my 84 GSL.
#17
Banned. I got OWNED!!!
iTrader: (3)
79-80 black door panels in good shape.
or
Any first gen manual window black / grey door panels in good shape. $30 plus shipping.
79-80 Rear view mirror with light cover. $10 plus shipping.
79-80 lower part of dash in black. It mounts to the dash and the floor, shifter pokes up through it. No cracks. (I have a few cracked ones) $30 plus shipping.
79-80 black drivers side wind up seat belt. $10.00 plus shipping.
-billy
or
Any first gen manual window black / grey door panels in good shape. $30 plus shipping.
79-80 Rear view mirror with light cover. $10 plus shipping.
79-80 lower part of dash in black. It mounts to the dash and the floor, shifter pokes up through it. No cracks. (I have a few cracked ones) $30 plus shipping.
79-80 black drivers side wind up seat belt. $10.00 plus shipping.
-billy
#19
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
For 1984/1985:
Distributor
Black/Dark Grey interior components:
Stereo surround (Color not specific)
Steering column covers
Door panels (Including everything that comes on em. Door handle cups and such.
Headliner (With sunroof)
Sunroof ****
Seatbelts and retractors
Really hard to tell you what I'd pay for them, because I dunno where you're located. Shipping is $...
Distributor
Black/Dark Grey interior components:
Stereo surround (Color not specific)
Steering column covers
Door panels (Including everything that comes on em. Door handle cups and such.
Headliner (With sunroof)
Sunroof ****
Seatbelts and retractors
Really hard to tell you what I'd pay for them, because I dunno where you're located. Shipping is $...
#20
Rotartist
Thread Starter
iTrader: (13)
Join Date: Sep 2003
Location: Spring Hill TN 37174
Posts: 7,252
Likes: 0
Received 2 Likes
on
2 Posts
I live in TN.. here is what I am picking up today and the prices I can ship them at..
these prices are shipped.
Glass Sunroof w/ hardware- $165 shipped in USA
Sunroof ****- $20
Ignigters- $26 a pair
distributer with ign- $80
tail light assemblies- (good shape little to no cracks at all)- $30 each shipped (L or R)
lights ( sides or front) $25 full set or $10 for each pair
dome light cover- $12 shipped
Keep them comming I decided to go back tonight with my tools- leaving here at 2:30pm
these prices are shipped.
Glass Sunroof w/ hardware- $165 shipped in USA
Sunroof ****- $20
Ignigters- $26 a pair
distributer with ign- $80
tail light assemblies- (good shape little to no cracks at all)- $30 each shipped (L or R)
lights ( sides or front) $25 full set or $10 for each pair
dome light cover- $12 shipped
Keep them comming I decided to go back tonight with my tools- leaving here at 2:30pm
#23
Rotartist
Thread Starter
iTrader: (13)
Join Date: Sep 2003
Location: Spring Hill TN 37174
Posts: 7,252
Likes: 0
Received 2 Likes
on
2 Posts
they had one gsl I will see if the steering unit is there^
The urgency is this junkyard only leaves the car's there for 30 days then they crush them.. These 7's are almost done with thier 30 day stay, and will be crushed!!!
Now I am going to buy these parts as requested TONIGHT. I you requested a part and don't really intend on purchasing it let me know VIA pm and I won't grab it. If i do buy a part and someone flakes I will put it for sale in the 1ST GEN for sale section. I am not trying to make a big profit on these things I just don't want to see them crushed! I am currently out of work on disablility and I don't have a bunch of money to throw around on car parts.. SO please dont flake on me...
The urgency is this junkyard only leaves the car's there for 30 days then they crush them.. These 7's are almost done with thier 30 day stay, and will be crushed!!!
Now I am going to buy these parts as requested TONIGHT. I you requested a part and don't really intend on purchasing it let me know VIA pm and I won't grab it. If i do buy a part and someone flakes I will put it for sale in the 1ST GEN for sale section. I am not trying to make a big profit on these things I just don't want to see them crushed! I am currently out of work on disablility and I don't have a bunch of money to throw around on car parts.. SO please dont flake on me...
Last edited by RRTEC; 11-01-04 at 12:52 PM.
#25
How About A Cup Of STFU
Join Date: Sep 2004
Location: ALBANY, GA
Posts: 1,552
Likes: 0
Received 0 Likes
on
0 Posts
REPEAT: I need a driver's side rear axle for a 1981 with rear drum brakes. I just need the flanged shaft. $45 plus shipping ?
Did you forget me ? Not enough ? Let me know.
From Tennessee, but in Georgia now... Davidcgrimes@yahoo.com
Also, If there is a rear panel that goes between the tail lights in uncracked, unwarped condition ( you know, the smokey acrylic piece that likes to be cracked and warped ), I want it !!!
Did you forget me ? Not enough ? Let me know.
From Tennessee, but in Georgia now... Davidcgrimes@yahoo.com
Also, If there is a rear panel that goes between the tail lights in uncracked, unwarped condition ( you know, the smokey acrylic piece that likes to be cracked and warped ), I want it !!!