Fibreglass hoods
#1
Fibreglass hoods
OK, I'm a glutton for punishment, here goes.
I have located a diferent fibreglass guy, he is stating I can get full FB hoods for $250, with original hinge and latch locations or race skins for $200, they will be light but actual wont be known until he makes one. I am addressing the TII scoop issue but I need a scoop, anyone got a bent hood they could cut the scoop out of for a sample, it can be returned.
Numbers for definate starters please.
Steve
I have located a diferent fibreglass guy, he is stating I can get full FB hoods for $250, with original hinge and latch locations or race skins for $200, they will be light but actual wont be known until he makes one. I am addressing the TII scoop issue but I need a scoop, anyone got a bent hood they could cut the scoop out of for a sample, it can be returned.
Numbers for definate starters please.
Steve
#5
Any Idea how much a carbon fiber hood would cost? I would be interested in a CF hood. Are the plans for just for a TII scoop, are there any other possiblities for a hood that will get rid of the hot air?
#7
I will get a price on CF but it wont be cheap, the product is way up in price now.
If we have the numbers I can have any hood/scoop combo made, also need a sample of the hood for molding purposes.
Lets get 5 of one type done first so lets go with the orders. I'm going to get a deposit on orders so that I'm not left holding these hoods.
I will post on Ohiorotaries.
If we have the numbers I can have any hood/scoop combo made, also need a sample of the hood for molding purposes.
Lets get 5 of one type done first so lets go with the orders. I'm going to get a deposit on orders so that I'm not left holding these hoods.
I will post on Ohiorotaries.
Trending Topics
#17
Turnaround should be about two weeks from when I get the sample to him, I'm picking up a clean hood and sunroof today, I need a TII scoop or any other style in hand for a few days for a mold to be made, these will be returned in the same condition unless the paint is very bad.
I want $50 deposit, this is just to ensure people follow through, I dont want to get left holding three hoods.
Tranquil if you get me the RE Amemiya vents I can have those done quickly.
Steve
My guy is pricing CF for us, he needs to buy a minimum amount of sheet and resin so pricing is up.
I want $50 deposit, this is just to ensure people follow through, I dont want to get left holding three hoods.
Tranquil if you get me the RE Amemiya vents I can have those done quickly.
Steve
My guy is pricing CF for us, he needs to buy a minimum amount of sheet and resin so pricing is up.
#22
OK, I have a sunroof being made, we will offer a standard replacement one and one with a vent similar to WRC style. Pricing will be around $100 including a special glue to reattach the original hardware to secure the roof. You can order without the glue for $20 less. Shipping will be actual price by zip code.
Roof will weigh an estimated 2 lbs without brackets trim etc. the original is two layers of pressed steel and weighs a lot more. Glass is ridiculously heavy.
I will post pix ASAP.
Hood will be soon after that. I am working on a hood with a NASA style vent on the passenger side for direct air flow into intake. Also looking at vents on trailing edge of hood.
Roof will weigh an estimated 2 lbs without brackets trim etc. the original is two layers of pressed steel and weighs a lot more. Glass is ridiculously heavy.
I will post pix ASAP.
Hood will be soon after that. I am working on a hood with a NASA style vent on the passenger side for direct air flow into intake. Also looking at vents on trailing edge of hood.
#25
OK note: weight, no scoop, no vents. Do they offer custom builds? Is the product finished so that composites can remain unpainted? Do they have a sunroof? Are they interested in building for RX7club members requirements?
Are you suggesting I'm wasting my time. I don't get your reason for posting this on my thread. I suggest a seperate thread is more appropriate.
Are you suggesting I'm wasting my time. I don't get your reason for posting this on my thread. I suggest a seperate thread is more appropriate.