1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

FD driver almost get beat

Thread Tools
 
Search this Thread
 
Old 04-12-03 | 11:45 PM
  #1  
Thread Starter
damn hippies
 
Joined: Feb 2002
Posts: 528
Likes: 0
From: Syracuse NY/Houston texas
FD driver almost get beat

So i was at the local hang out for local street racers and club cars in the area....was a nice night and alot of fast cars out and i see a 93 pull in, he got out and poped the hood and everyone was looking at it . As the kid started talking about it i found i knew more about his car than he did....the next thing i hear out of his trap was "The older ones are shity and slow" so the next thing out of my mouth was "**** you hippy i own 2 and they arent to slow" he he was like "what do they have 100hp?" im like some have less some have more but for a 1.2 na engine 100 hp isnt to bad..anyways the point of my story was the kid was a homo with a stock fd that thought he was gad and i wanted to put my foot up his ***, anyways he said his car could beat a 350hp eclips and i lol and left....another thing he said that turned me was tat 2900lb are is "lite" i said no a lite car is a 900lb crx anyways that was my night at the bulavard
Old 04-12-03 | 11:55 PM
  #2  
Keaponlaffen's Avatar
---------------------
 
Joined: Nov 2001
Posts: 2,029
Likes: 0
From: Kamloops BC Canada
by the title of this thread, I was expecting you to say that you raced him and almost handed his *** to him to prove that 1st gens aren't slow
Old 04-13-03 | 12:02 AM
  #3  
Thread Starter
damn hippies
 
Joined: Feb 2002
Posts: 528
Likes: 0
From: Syracuse NY/Houston texas
later in the season he will get beat...some guy has a gray 85 its ported and it sounds likes he shifts around 11k...he would hand him his *** anyday
Old 04-13-03 | 12:10 AM
  #4  
onepointone's Avatar
i say what i want
 
Joined: Aug 2002
Posts: 1,866
Likes: 0
From: richmond, va
damn, i hate that ****.. i always honk at all the rx7's around here, and i always get one back except this one fd that has a red decal on each fender. anyways, i honked at him one day in traffic and he was beside me. he looked over and i waved and he shook his head and looked forward. just **** like that pisses me off. that guy in the first gen needs to woop his *** and show him whats up
Old 04-13-03 | 01:09 AM
  #5  
Cody's Avatar
SKELETOR!
 
Joined: Mar 2003
Posts: 1,077
Likes: 0
From: Prescott Valley, AZ
Why didn't YOU race him? "Almost got beat?" Sounds like he punked you out and you left.
Old 04-13-03 | 02:53 AM
  #6  
O 16581 72452 5's Avatar
The infamous number guy!
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
I always get the engine revs from other rx-7 owners, if i leave my car parked people will walk around it and check it out... not sure what's so cool about my car, it looks horrible right now.
Old 04-13-03 | 02:57 AM
  #7  
O 16581 72452 5's Avatar
The infamous number guy!
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
Should have also mentioned the SEs had the same block as him and were 400lbs lighter.
Old 04-13-03 | 03:27 AM
  #8  
wwilliam54's Avatar
it WILL run
 
Joined: Dec 2002
Posts: 2,017
Likes: 1
From: Raleigh,MS
fb>fd
that is all


(but of course sa,fb,fc,fd>*)
Old 04-13-03 | 04:01 AM
  #9  
gamble302's Avatar
roadkill hats rock
 
Joined: Jul 2001
Posts: 1,396
Likes: 0
From: Austin, Texas
what do stock fd's run in the 1/4 anyways?
Old 04-13-03 | 04:19 AM
  #10  
O 16581 72452 5's Avatar
The infamous number guy!
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
High 13s i believe.
Old 04-13-03 | 06:08 AM
  #11  
SoRRoW's Avatar
MY NEW NAME IS ROTARY 7S
 
Joined: Jun 2002
Posts: 1,323
Likes: 0
From: Cell Block 4 (LOCKDOWN)
I own both a FB and a FC...
I hate to say I love the FB more..You can do ANYTHING to it you cant do to a FC..

Well anyways heres a little story..

Some of you all know,I like to help others online with info If I can...well a member on this site,which lives in my area,started **** talking to me/about me on a local forum,,

Then the sorry ****** carried it on here,in the Second G forum,

Talking **** how 12A are for ricers,12A are for kids who cant tune a 13B,and all this bullshit...So I was **** talking back...well then he comes out talking **** to race me...saying my **** is slow,Anyways hes got this ricer type car club,wanna be race crew...well my car is so slow it beat most of them there with my1/4 mile time,on the track,he had a gutted down unsafe to drive on the streets FC..so I go to a track back in Novembers to meet these guys and I brought another first gen there with me..

I almost beat a FD by .2 cause he couldnt drive but he beat me.All of the other FCs couldnt beat mine besides the guy who stripped his **** down.I ran my best time of 15.3 He ran 15.7 and 15.3.

Any ways some people were talking **** about for me to put up some money to race,and I said about 50 times..m car is getting built right now..I cannot do ****,you can either wait a couple months or race my friends car with the same set up..$100. per run..winner takes all..

Well he shut the **** up quick about racing for money.Well a local track here has this thing on the first Friday of the month $8. to get in and run from 8pm to 2am,and that guy with the gutted FC took his rice club out there.Well guess what/who ran the best time the whole ****** night...

My friends "secret" port 12A in a 83 shell,all stock Mazda first gen drive train.He ran the best time of that night 13.1 but thats an 11 sec engine,we just put it in that shell 3 weeks prior.
79 tranny,83 GSL rear,Holley carb set up..etc..etc

Well some people was saying how every one was saying ooh thats Tonys boy (me),so net day comes around..and he comes up with 101 million excuses why not to race me..and I wanted to race him with a "modded' engine and his **** is stock with 300k miles and he had the car for 10 yrs and the **** didnt end..

Well dont talk **** when your talking about racing on the track cause anything goes.and I love it soo dam much ..when a 12A spanks the **** out of others,

For you other guys whos staying with 12As...you can do alot better than a 6 port 13b can..I belive so..
Old 04-13-03 | 01:12 PM
  #12  
Pele's Avatar
Right near Malloy
iTrader: (28)
 
Joined: Dec 1999
Posts: 7,847
Likes: 513
From: Behind a workbench, repairing FC Electronics.
Originally posted by SoRRoW
"secret" port 12A
Awww.. Let us in on it..
Old 04-13-03 | 03:02 PM
  #13  
SoRRoW's Avatar
MY NEW NAME IS ROTARY 7S
 
Joined: Jun 2002
Posts: 1,323
Likes: 0
From: Cell Block 4 (LOCKDOWN)
I got to get pics of his car,and get vids on it..

He tells some people its a race port... or a large street,but it sounds mean like a big bridge,I dont know what it is..
Old 04-13-03 | 04:42 PM
  #14  
Jeff20B's Avatar
Lapping = Fapping
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 83
From: Near Seattle
Half bridge?
Old 04-14-03 | 09:40 AM
  #15  
Pele's Avatar
Right near Malloy
iTrader: (28)
 
Joined: Dec 1999
Posts: 7,847
Likes: 513
From: Behind a workbench, repairing FC Electronics.
Originally posted by Jeff20B
Half bridge?
WHaddat? Is that where you bridge your center housing and street the end plates... Or something like that?
Old 04-14-03 | 09:42 AM
  #16  
SoRRoW's Avatar
MY NEW NAME IS ROTARY 7S
 
Joined: Jun 2002
Posts: 1,323
Likes: 0
From: Cell Block 4 (LOCKDOWN)
Originally posted by Jeff20B
Half bridge?
Actually I dont know..I dont think he does either..
Pito from Pito racing built it for him..

Pito owns a Toyota Starlet with a Mazda MP3 front nose on it..

it was at rotorfest if any of you guys went..
Old 04-14-03 | 09:56 AM
  #17  
pillage6's Avatar
Rotary Enthusiast
 
Joined: Nov 2002
Posts: 1,060
Likes: 0
From: Jax, FL
Tell me how the tranny holds up.

I am putting out about 230 to the wheels and have an 83 tranny and I don't abuse it since I think it will blow up if I do.
Old 04-14-03 | 10:02 AM
  #18  
jeremy's Avatar
male stripper
iTrader: (1)
 
Joined: Oct 2001
Posts: 3,131
Likes: 1
From: St Petersburg, FL
bickering among 7 owners is about as gay as you can get. whine this whine that. i wouldn't haven given the kid a comment. i would have just chuckled and walked off because obviously he has never heard of respect and had nothing better to do then talk ****. without the previous iterations there would be no 3rd gen. there would be no heritage. there would be no imsa domination and rotaries wouldn't have been banned or highly restriced due to their unfair advantage. no to pick on you sorrow as many have done this but you are now dissing on 2g's from your past experience, so in turn there is no end point. let the kid talk ****. if someone can beat him in a 1st gen then do it as actions are what makes the statement not words. and you really haven't proven anything to him as he doesn't care and probably never will. hell mommy and daddy probably bought him that car after he watched f&f and saw it in import tunerz. each model has they're ups and downs and everyone could argue some point but it never proves anything. everyone has their own reasons why they own what they own and want to find its particular potential. who would really think about putting a caravan in the 13's? but somenoe did. why because he wanted to. some think its cool and some not. i really don't think the kid cares. same to you guys. enjoy the cars and don't get your feathers ruffled by big mouth morons.
Old 04-14-03 | 10:11 AM
  #19  
pillage6's Avatar
Rotary Enthusiast
 
Joined: Nov 2002
Posts: 1,060
Likes: 0
From: Jax, FL
I hate seeing Mazda on Mazda crimes.
Old 04-14-03 | 10:17 AM
  #20  
jeremy's Avatar
male stripper
iTrader: (1)
 
Joined: Oct 2001
Posts: 3,131
Likes: 1
From: St Petersburg, FL
Originally posted by pillage6
I hate seeing Mazda on Mazda crimes.
lol

only YOU can prevent forest fires.
Old 04-14-03 | 01:22 PM
  #21  
Directfreak's Avatar
I can has a Hemi? Yes...
iTrader: (2)
 
Joined: Dec 2001
Posts: 9,371
Likes: 4
From: 3OH5
Originally posted by pillage6
I hate seeing Mazda on Mazda crimes.
Old 04-16-03 | 08:30 AM
  #22  
timmya2's Avatar
Banned. I got OWNED!!!
 
Joined: Nov 2002
Posts: 1,068
Likes: 0
From: Pensacola
i wave at all first gens..and they wave back

but never on second or third
Old 04-16-03 | 09:54 AM
  #23  
pvc's Avatar
pvc
Not a registered voter
 
Joined: Aug 2002
Posts: 266
Likes: 0
From: East Wenatchee, WA
I agree with jeremy. A co-worker of mine is a V8 fan and spends every day at work telling me how useless rotaries are. He says basicly any car or truck that is a stick could pretty much beat my car (he says this still, even after his 67' Cougar was wasted by my car over and over again). He is never wrong, and it is totally useless to argue with him.

So I decided to stop talking about cars with him. But any time... any time he wants, I'll be there at the drag strip to put actions into words.

Some day I'll post a video, beginning with an interview with him. Following the interview, will be his pride crushing loss. At the end you will hear various excuses for why he lost.
Old 04-16-03 | 10:29 AM
  #24  
Cody's Avatar
SKELETOR!
 
Joined: Mar 2003
Posts: 1,077
Likes: 0
From: Prescott Valley, AZ
lol....PVC

That sounds just like this video I saw a few months ago on Superhonda.com. It was like a 97 Acura CL, I think supercharged, against something like a 92 Camaro.

The guy in the Camaro was saying how his car is so fast, and could destroy that CL (they were filming the guy talk shi* at a gas station).

They show the race, filmed from the passenger seat in the Camaro. It shows the Camaro start to take off, and then a second later, you see the CL just fly by him.

He starts whining in the car "my trans is slipping, Damn it....the A/C was on....I need a tune up...." etc etc.

It was hilarious.
Old 04-16-03 | 10:43 AM
  #25  
Thread Starter
damn hippies
 
Joined: Feb 2002
Posts: 528
Likes: 0
From: Syracuse NY/Houston texas
cody
"Why didn't YOU race him? "Almost got beat?" Sounds like he punked you out and you left."

i was up there in a 2000 wrx after i told the kid he dosnt know what he was talking about he shut his hole and siad a 2900 lb car was light...my buddies just lol and told him 2900 lbs is not light and he left....the only thing he could say about the engine was "its different"



All times are GMT -5. The time now is 04:19 AM.