FB clutch slave cylinder
03-12-06 | 02:09 PM
#4
Old [Sch|F]ool
Joined: May 2001
Posts: 12,635
Likes: 464
From: Cleveland, Ohio, USA
Not quite right. 
'79-80 have the odd-thread hydraulics.
'81-82 12A and GSL-SE are the same design as '79-80 except with the "normal" thread hydraulics.
'83-85 12A have a different casting design to make it easier to bleed the clutch with the beehive oil cooler in the way.
They all do have the same bore size, same internals, and they all bolt up the same way.
'79-80 have the odd-thread hydraulics.
'81-82 12A and GSL-SE are the same design as '79-80 except with the "normal" thread hydraulics.
'83-85 12A have a different casting design to make it easier to bleed the clutch with the beehive oil cooler in the way.
They all do have the same bore size, same internals, and they all bolt up the same way.
03-12-06 | 02:33 PM
#5
You've Been Punk'd
Joined: Jun 2002
Posts: 4,727
Likes: 0
From: Branson, Missouri
i need to get rebuild kits for my slave (i think a new one is just as cheap). master and brake master cylinders. those brake master cylinders are kinda pricey.
nevermind, they arent that bad on rockauto.com
nevermind, they arent that bad on rockauto.com
Last edited by razorback; 03-12-06 at 02:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post