1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

engine lugs at lower RPM

Thread Tools
 
Search this Thread
 
Old 05-26-04 | 06:54 AM
  #1  
RxInMaine's Avatar
Thread Starter
Newbie
 
Joined: May 2004
Posts: 3
Likes: 0
From: Maine
Question engine lugs at lower RPM

I have had a 1985 RX7 for about four years now and love it. Just before storing it last fall it didn't seem to be running the same. After it has warmed up and the choke pops in, the engine lugs at lower RPMs, like while first starting from a stop sign or while cruising through town at 35 mph, etc. It runs great when you drive it hard. I have changed the fuel filter, spark plugs, etc. basic tune up. Does anyone have any ideas what I could do to get it running like it used to?
Old 05-26-04 | 07:04 AM
  #2  
Rx7carl's Avatar
Airflow is my life
 
Joined: Aug 2002
Posts: 6,736
Likes: 2
From: Orlando, Fl
Does it hesitate or anything like that? Or just slow acceleration?

PS- Welcome to the board
Old 05-26-04 | 01:58 PM
  #3  
RxInMaine's Avatar
Thread Starter
Newbie
 
Joined: May 2004
Posts: 3
Likes: 0
From: Maine
It's more like slow acceleration. Once it gets upt to 4000-4500 RPM you can really feel the pick up. When starting, you have to give it a lot of gas or it will really heistate almost to the point of stalling. It hasn't always been like this. It used to really have power all the time.
Old 05-26-04 | 03:22 PM
  #4  
cpt_gloval's Avatar
KARATE EXPLOSION
iTrader: (1)
 
Joined: Aug 2001
Posts: 2,991
Likes: 33
From: Deadmonds, WA
sounds like your carb may be out of whack.
Old 05-26-04 | 03:41 PM
  #5  
rototiller1's Avatar
Inspector, Falcon Jet

 
Joined: Mar 2003
Posts: 430
Likes: 0
From: Little Rock
tierd engine
Old 05-26-04 | 03:54 PM
  #6  
FB II's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2002
Posts: 4,192
Likes: 0
From: wishing i was back in FL
vaccum leak? hahaha, lets try it all! what (if anything) have you done to the motor lately?
Old 05-26-04 | 05:40 PM
  #7  
Rx7carl's Avatar
Airflow is my life
 
Joined: Aug 2002
Posts: 6,736
Likes: 2
From: Orlando, Fl
Sounds like either something in the primaries is clogged or your accelerator pump is kaput. Check the AP first.
Old 05-27-04 | 06:56 AM
  #8  
RxInMaine's Avatar
Thread Starter
Newbie
 
Joined: May 2004
Posts: 3
Likes: 0
From: Maine
I haven't done anything to the motor lately other than a basic tuneup. The car was idleing at a lower RPM so I adjusted that; maybe not enough. What is a good idle RPM? Could a different kind of spark plug make a difference?
Old 05-27-04 | 07:13 AM
  #9  
Rx7carl's Avatar
Airflow is my life
 
Joined: Aug 2002
Posts: 6,736
Likes: 2
From: Orlando, Fl
800 is good. Check that the AP shoots gas out the nozzles when you operate the throttle.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
armans
3rd Generation Specific (1993-2002)
5
08-15-15 09:08 PM
jza80
Suspension/Wheels/Tires/Brakes
2
08-12-15 11:10 PM



Quick Reply: engine lugs at lower RPM



All times are GMT -5. The time now is 02:24 PM.