Ebay turbo set-up for "fb" CHEAP!!!
#1
Ebay turbo set-up for "fb" CHEAP!!!
http://cgi.ebay.com/ebaymotors/Arkay...ayphotohosting
Looks like a 12a in the pic.....
Guys wanting to go turbo, you can't get cheaper than this!! Move quick!
Looks like a 12a in the pic.....
Guys wanting to go turbo, you can't get cheaper than this!! Move quick!
Trending Topics
#11
Originally Posted by kevinbtz
that should be for a 4 port 13b like what was in the REPU or the cosmo
There are injector ports on the center housing.. Most likely a mismatch of parts.. but it is a 4 port 13B most likely.
#21
Its a mismatch of parts..
The engine is a 4 port for sure. So it can't be a 6 port motor.
It has a center housing with injector ports. So it can't be an older 13B.
It has too be a newer 13B with older parts bolted on to make it fit in a older body.
I had a S5 TII engine in my GSL-SE using a 1st gen front cover & oil pan.. I was also useing a 13B-REW upper intake manifold.. There are alot of parts you can swap between engines.
The engine is a 4 port for sure. So it can't be a 6 port motor.
It has a center housing with injector ports. So it can't be an older 13B.
It has too be a newer 13B with older parts bolted on to make it fit in a older body.
I had a S5 TII engine in my GSL-SE using a 1st gen front cover & oil pan.. I was also useing a 13B-REW upper intake manifold.. There are alot of parts you can swap between engines.
#22
Wheel Revolutionist!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Hey guys i have a 12 A how much custom work would have to be done to put it on my motor would i just block off the 5th and 6th ports? I need more info on this. How much does a turbo setup usually cost?
#23
Resident autoglass pro
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (1)
Join Date: Jul 2003
Location: edinburg PA
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
check out rotaryshack.com for turbo carb setup parts.
$2k plus for a turbo setup, and then some probably IMO to do it right.
as far as adaptability for that specific ebay setup, IDK, the drawthrough setup might bolt right onto a 12A intake manifold, might not, im sure someone else can answer that though.
~Chris
$2k plus for a turbo setup, and then some probably IMO to do it right.
as far as adaptability for that specific ebay setup, IDK, the drawthrough setup might bolt right onto a 12A intake manifold, might not, im sure someone else can answer that though.
~Chris
#24
Originally Posted by Eriks85Rx7
Hey guys i have a 12 A how much custom work would have to be done to put it on my motor would i just block off the 5th and 6th ports? I need more info on this. How much does a turbo setup usually cost?
#25
That is most likely a GSL-SE 13B with 12A end plates to make it a 4 port 13B. That would make sense. Either that or its 12A turbo end and intermediate housings with GSL-SE rotor housings and internals. Either way you get the point.
The old Arkay turbo system was designed and built by Kas Kastner. Everything was cast. The kit in stock form produced 202 BHP at 7000 rpm at 7 psi in a drawthrough configuration without intercooling. He made them for 12A and 13B engines so I'm not sure which engine that power figure was from. From the boost level and power output I'm inclined to say that was the boosted 13B power figure for the day.
The old Arkay turbo system was designed and built by Kas Kastner. Everything was cast. The kit in stock form produced 202 BHP at 7000 rpm at 7 psi in a drawthrough configuration without intercooling. He made them for 12A and 13B engines so I'm not sure which engine that power figure was from. From the boost level and power output I'm inclined to say that was the boosted 13B power figure for the day.