I'm getting ready to get all the stuff to do the DLIDFIS and I was wondering how your supposed to wire your main igntion power wire to your ignition switch, to send power to your coils when you turn the key to the on position. Or can you just wire it to the black and white wire that already powers the coils? Pretty much how did you guys send power to you coils?

 

Hey...just got mine installed tonight. Yes, use the original wires that powered your leading coil.
Check out this thread https://www.rx7club.com/1st-generation-specific-1979-1985-18/2gcdfis-write-up-w-pics-476657/

 

Did you use two leading coils or a 2gen coil? If you used two leading coils were you able to find some connectors for the wires that come out of the back of you Ignitors and go to your magnetic pick-ups?

 

Sorry, I signed off after my response. I used a 2nd gen coil. I may be wrong, but I thought I had heard the connector that goes to the Sub-zero start reservoir would work for a igniter connector.

Also this site http://www.geocities.com/cd23c/dlidfis.html

 

Alright i'll give it a try, Thanks.