DIY: Minitub/4 Link
#176
making paper cranes
Join Date: Sep 2008
Location: Ottawa, ON, Canada
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
I've been thinking about your exhaust problem. What about going single, and then turning it under the car to dump out the left side of the car just before the wheel in a L type shape? Should give you enough room to fit all the business to keep it quieter.
Another more crazy possibility would be to bring it up and over, then dump straight down in the stock location. It's hard to tell the angle you'd need from pictures, it might be to severe to be worth it. Not to mention a tricky mounting and shielding challenge.
Another more crazy possibility would be to bring it up and over, then dump straight down in the stock location. It's hard to tell the angle you'd need from pictures, it might be to severe to be worth it. Not to mention a tricky mounting and shielding challenge.
#178
making paper cranes
Join Date: Sep 2008
Location: Ottawa, ON, Canada
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Dynomax's Thrush Turbo Mufflers are 16 inches tip to tip, and only 25$. But I would suggest using as many different types of mufflers as you can to cut out different resonances. Then there's always tip silencers, they are good for 7db. And if you really want to get down to business, you can get a header collector insert from Car Chemistry.
If it's one thing civic ricers have given us, it's how to make a ridiculous exhaust systems meet noise restrictions.
If it's one thing civic ricers have given us, it's how to make a ridiculous exhaust systems meet noise restrictions.
#179
Yo this car is looking really good bro please post it in our new forum www.3tcgarage.com bro we lovo rotaries in this new forum, see you there too!
#180
i'm a poser
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
whoa.. spam?
hope you can get a good exhaust system on it. is that pretty much the same engine as the one in 13B-RX3's rx3?
looks like it will be too loud. definitely want to see a video of it running
hope you can get a good exhaust system on it. is that pretty much the same engine as the one in 13B-RX3's rx3?
looks like it will be too loud. definitely want to see a video of it running
#182
unregistered rex offender
Join Date: Oct 2003
Location: Spokane, Washington
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
#186
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
The motor will pop on the first dyno pull that Steve does. I actually hope I don't jinx you though. Looking good though, send me a PM as soon as you get it all done and running, I would like to swing by and see it.
#187
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,140
Received 0 Likes
on
0 Posts
I'm just going to worry about getting it ready to tune right now, and make the tubs a last priority. A few little rocks can't hurt that bad, right?
And.. I've come to the conclusion that a rear exit exhaust just isn't going to work.
#188
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
Right on, I hope to get alot of the small stuff done this weekend. Then, hopefully I can work on getting the driveshaft made next weekend and get the battery hooked up. I could be forgetting something but I'm pretty darn close.
I'm just going to worry about getting it ready to tune right now, and make the tubs a last priority. A few little rocks can't hurt that bad, right?
And.. I've come to the conclusion that a rear exit exhaust just isn't going to work.
I'm just going to worry about getting it ready to tune right now, and make the tubs a last priority. A few little rocks can't hurt that bad, right?
And.. I've come to the conclusion that a rear exit exhaust just isn't going to work.
I think just getting it completed for a tune is the best option right now. Especially if it's going to be held the first weekend of June. That's only....damned, 7 weeks away.....or so, my math is horrible right now. lol
Even if you don't get the tubs done before then, you can still trailer it over if you are that worried about getting knocked out from some random item on the shitty highways we have around here.
#189
i'm a poser
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
lol funny, hope that "junkyard motor" last at least a year. that's how long my friends' did. then it became a lawn mower. anyway, hope it turns out well.
I still would like to see a video of it. if a picture says a thousand words, a video says a million.
hoping you break 150 hp at the front wheels :P
I still would like to see a video of it. if a picture says a thousand words, a video says a million.
hoping you break 150 hp at the front wheels :P
#193
Topless, & Barely Legal
iTrader: (2)
Looking real good there Eric. What diameter exhaust are you planning on running? It sounds like you would prefer a rear exit. If that was the plan, is the concern ground clearance in back, or basically just "getting through" the rear suspension/diff area with the pipe routing? If the routing is the issue, my exhaust guy assures me there is always more room than you think His name is Harold at Furo Racecraft. I have some pics of a three inch exhaust he did up for an Ariel Atom that is local to me, after Ariel said it couldn't be done. Here is a link to his website's exhaust page. Some of the pics are good food for thought.
http://www.furoracing.com/exhaust.html
I especially like how he sneaked this 4.5 inch system in on the Duster:
http://www.furoracing.com/exhaust.html
I especially like how he sneaked this 4.5 inch system in on the Duster:
#194
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,140
Received 0 Likes
on
0 Posts
Take a look at my pictures, there is no way to get a exhaust past the rearend, no room at all back there
Got everything finished up today, filled her up with royal purple, topped it off with e85 and fired it up....... no exhaust is too loud on this thing
Just need a driveshaft..... then it's time to take it for a spin
Got everything finished up today, filled her up with royal purple, topped it off with e85 and fired it up....... no exhaust is too loud on this thing
Just need a driveshaft..... then it's time to take it for a spin